Valid

HG/T 4284-2011Borosilicate glass sight glasses for pressure piping (English PDF)

压力管道硼硅玻璃视镜

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4284-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 4284-2011 is the English-translated version of 压力管道硼硅玻璃视镜.

HG/T 4284-2011 is the Chinese standard "Borosilicate glass sight glasses for pressure piping". Its scope clause reads: This standard specifies the labeling, materials, requirements, inspection methods, inspection rules, marking, packaging, transportation and storage of borosilicate sight glasses for pressure pipelines.

This standard is applicable to sight glasses made by physical strengthening and tempering process and used for observation holes of pressure pipelines (or containers).

The maximum allowable working temperature of the glass shall be not more than 280°C, and the working pressure shall be less than 5.0MPa. Its clauses include marking.

Found what you need?

Document preview — HG/T 4284-2011

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword iv
  • 1 Scope
  • 2 Normative references
  • 3 Marking
  • 4 Requirements
  • 4.1 Technical requirements
  • 4.2 Appearance quality
  • 4.3 Dimension, shape and deviation
  • 4.4 Polarized light inspection
  • 4.5 Light transmittance
  • 4.6 Thermal shock resistance
  • 4.7 Allowable working pressure
  • 4.8 Glass material
  • 4.9 Installation requirements of sight glass
  • 5 Inspection methods
  • 5.1 Appearance quality
  • 5.2 Dimension, shape and deviation
  • 5.3 Polarized light inspection
  • 5.4 Visible light transmittance
  • 5.5 Thermal shock resistance
  • 5.6 Allowable working pressure
  • 6 Inspection rules
  • 6.1 Inspection classification and items
  • 6.2 Batching rules and judgment
  • 7 Marking, packaging, transportation and storage
  • 7.1 Marking
  • 7.2 Packaging
  • 7.3 Transportation
  • 7.4 Storage
  • Annex A (Normative) Basic structure and installation dimensions of cylindrical sight glass (sight cup)
  • Annex B (Normative) Basic structure and installation dimensions of sight glass for pressure pipeline

1 Scope

This standard specifies the labeling, materials, requirements, inspection methods, inspection rules, marking, packaging, transportation and storage of borosilicate sight glasses for pressure pipelines.

This standard is applicable to sight glasses made by physical strengthening and tempering process and used for observation holes of pressure pipelines (or containers). The maximum allowable working temperature of the glass shall be not more than 280°C, and the working pressure shall be less than 5.0MPa.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 5137.2 Test methods of safety glazing materials used on road vehicles - Part 2: Optical properties tests

GB/T 6579-2007/ISO 718: 1990 Laborator glassware - Thermal shock and thermal shock endurance - Test methods

GB/T 6580 Glass - Resistance to attack by a boiling aqueous solution of mixed alkali - Method of test and classification

GB/T 6581 Glass-Resistance to attack by hydrochloric acid at 100°C - Flame emission or flame atomic absorption spectrometric method

GB/T 6582 Glass - Hydrolytic resistance of glass grains at 98°C - Method of test and classification

GB/T 16920 Glass - Determination of coefficient of mean linear thermal expansion

ASTM C601-85(2010) Standard Test Method for Pressure Test on Glass Pipe

3 Marking

Product labeling consists of standard number and main parameters. Marking example as shown in Figure 1: tempered borosilicate sight glass with outer diameter d1 of 100mm, thickness s of 15mm and working pressure of 2.5MPa are labeled as follows:

HG/T 4284-100×15-2.5 […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4284-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4284-2011

$105.00