Valid

HG/T 4178-2011Intelligent dual-cup flash point testers (English PDF)

智能双杯闪点测定仪

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4178-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 4178-2011 is the English-translated version of 智能双杯闪点测定仪.

HG/T 4178-2011 covers intelligent dual-cup flash point testers and belongs to the recommended series of Chinese chemical industry standards.

It fixes the types and basic parameters of the instrument and sets its technical requirements, test methods and inspection rules, along with the provisions for the markings, the instruction manual, packaging, transport and storage.

The instrument addressed is the intelligent dual-cup flash point detector meeting the requirements of GB/T 261 and GB/T 3536; single-cup flash point testers may follow the standard as a reference.

GB/T 6587.6, GB/T 6587.8, GB/T 9969 and GB/T 13384 are quoted as well. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 4178-2011

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 4178-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

HG/T 4178-2011 covers intelligent dual-cup flash point testers and belongs to the recommended series of Chinese chemical industry standards. It fixes the types and basic parameters of the instrument and sets its technical requirements, test methods and inspection rules, along with the provisions for the markings, the instruction manual, packaging, transport and storage. The instrument addressed is the intelligent dual-cup flash point detector meeting the requirements of GB/T 261 and GB/T 3536; single-cup flash point testers may follow the standard as a reference. GB/T 6587.6, GB/T 6587.8, GB/T 9969 and GB/T 13384 are quoted as well.

HG/T 4178-2011 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,683 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 Normative references

GB/T 261-2008 — Determination of flash point - Pensky-Martens closed cup method [including MODIFICATION 1]

GB/T 3536-2008 — Petroleum products -- Determination of flash and fire points -- Cleveland open cup method

GB/T 6587.6

GB/T 6587.8

GB/T 9969

GB/T 13384

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting

JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines

HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy

HG/T 4177-2011 — Automatic complete units for lime milk preparation

HG/T 4176-2011 — Pneumatic triple-offset butterfly valves - General technical specifications

HG/T 4175-2011 — General technical requirements for instrument power supply systems in chemical plants

6 Classification and status

Chinese Standard Classification (CCS): G 97

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4178-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4178-2011

$55.00