HG/T 4077-2009Technical specification for application of anticorrosive coatings (English PDF)
防腐蚀涂层涂装技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4077-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 5, 2009
Implementation date
July 1, 2009
Scope
HG/T 4077-2009 is the English-translated version of 防腐蚀涂层涂装技术规范.
HG/T 4077-2009 is a recommended standard of the Chinese chemical industry giving the technical specification for the application of anticorrosive coatings.
It covers the preparation of the substrate, the requirements on the coating materials, the requirements on the coating itself, quality and safety during the work, and the inspection and acceptance of the finished job.
It applies to anticorrosive coatings laid on metal substrates of steel and on non-metallic substrates of concrete in gaseous corrosive environments.
Its surface preparation and coating test methods are taken from the documents it quotes, among them GB/T 5210-2006, GB/T 8923-1988, GB/T 9286-1998, GB 11375-1999, GB 13348-1992, GB 50046 and GB 50212-2002. Issued on 5 February 2009, it has applied since 1 July 2009.
Found what you need?
Document preview — HG/T 4077-2009
National Standard of the People's Republic of China
- ICS
- 71.120.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4077-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 5 February 2009 and has been in force since 1 July 2009.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended standard of the Chinese chemical industry giving the technical specification for the application of anticorrosive coatings. It covers the preparation of the substrate, the requirements on the coating materials, the requirements on the coating itself, quality and safety during the work, and the inspection and acceptance of the finished job. It applies to anticorrosive coatings laid on metal substrates of steel and on non-metallic substrates of concrete in gaseous corrosive environments. Its surface preparation and coating test methods are taken from the documents it quotes, among them GB/T 5210-2006, GB/T 8923-1988, GB/T 9286-1998, GB 11375-1999, GB 13348-1992, GB 50046 and GB 50212-2002.
HG/T 4077-2009 falls under ICS 71.120.01, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1720-1979 — Method of test for adhesion of paint films
GB/T 5210-2006 — Paints and varnishes -- Pull-off test for adhesion
GB/T 8923-1988 — Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ
GB/T 9286-1998 — Paints and varnishes--Cross cut test for films
GB 11375-1999 — Metallic and other inorganic coatings. Thermal spraying. Safe practices
GB/T 13288-1991 — Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment
GB 13348-1992 — Safety rules of static electricity with relation to liquid petroleum products [including MODIFICATION 1]
GB/T 16906 - 1997 — Standard test methods for electrical resistivity of antistatic coating in petroleum tanks
GB 50046
GB 50212-2002 — Specification for construction and acceptance of anticorrosive engineering of buildings
EJ/T 1111-2000
EJ/T 1112-2000
SJ/T 11294-2003 — General specification of floor coating for electrostatic protection
4 Where this standard sits
It cites 13 standards, among them GB/T 1720-1979, GB/T 5210-2006, GB/T 8923-1988, listed in full above.
One other standard in this catalogue cites it: GB/T 38054-2019.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Standards on related subjects:
GB/T 29465-2023 — Flange of floating heat exchangers
HG/T 5825-2021 — Test method for distribution performance of liquid distributors in packed towers
HG/T 4079-2009 — Inspection and evaluation rules for surface quality of polished metals
HG/T 4078-2009 — Cathodic protection - Technical specifications
7 Classification and status
International classification (ICS): 71.120.01
Chinese Standard Classification (CCS): G 90
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1720-1979Circle-drawing test of coating films
- GB/T 5210-2006Paints and varnishes -- Pull-off test for adhesion
- GB/T 8923-1988Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ
- GB/T 9286-1998Paints and varnishes - Cross-cut test
- GB 11375-1999Metallic and other inorganic coatings. Thermal spraying. Safe practices
- GB/T 13288-1991Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment
EJ/T 1111-2000 · EJ/T 1112-2000
Similar standards
How to Download HG/T 4077-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 11375-1999 — Metallic and other inorganic coatings. Thermal spraying. Safe practices
GB 13348-1992 — Safety rules of static electricity with relation to liquid petroleum products [including MODIFICATION 1]
GB 50046-1995 — Code for anticorrosion design of industrial construction
HG/T 4077-2009
$225.00