HG/T 3913-2006High speed centrifugal pumps - Technical specifications (English PDF)
高速离心泵技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3913-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 26, 2006
Implementation date
March 1, 2007
Scope
HG/T 3913-2006 is the English-translated version of 高速离心泵技术条件.
HG/T 3913-2006 is the Chinese chemical industry standard that sets the technical requirements for high speed centrifugal pumps, covering design, manufacture, testing and inspection as well as marking, packaging, transport and storage.
It is written for the high speed pumps used in the petroleum, chemical and gas industries to move acids, alkalis, alcohols, benzene, hydrocarbons, oils and pharmaceutical liquids of a viscosity below 0.5 Pa s at temperatures from -130 °C to 260 °C. The vertical and horizontal machines it describes run from 1.1 kW to 560 kW, deliver 0.6 m3/h to 140 m3/h, reach heads of 11 m to 3049 m and turn at 3000 r/min to 23700 r/min.
Other high speed centrifugal pumps of similar design may be referred to it. Issued on 26 July 2006, it has applied since 1 March 2007.
Found what you need?
Document preview — HG/T 3913-2006
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3913-2006 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 26 July 2006 and has been in force since 1 March 2007.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the Chinese chemical industry standard that sets the technical requirements for high speed centrifugal pumps, covering design, manufacture, testing and inspection as well as marking, packaging, transport and storage. It is written for the high speed pumps used in the petroleum, chemical and gas industries to move acids, alkalis, alcohols, benzene, hydrocarbons, oils and pharmaceutical liquids of a viscosity below 0.5 Pa s at temperatures from -130 °C to 260 °C. The vertical and horizontal machines it describes run from 1.1 kW to 560 kW, deliver 0.6 m3/h to 140 m3/h, reach heads of 11 m to 3049 m and turn at 3000 r/min to 23700 r/min. Other high speed centrifugal pumps of similar design may be referred to it.
HG/T 3913-2006 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150
GB/T 699
GB/T 700
GB/T 985
GB/T 1173
GB/T 1174
GB/T 1176
GB/T 1184
GB/T 1568
GB/T 1804
GB/T 2100
GB/T 3077
GB/T 3215
GB/T 3216
GB 3836.1
GB 3836.2
GB 3836.3
GB 3836.4
GB 3836.5
GB 3836.6
GB 3836.7
GB 3836.8
GB 3836.9
GB 3836.10
GB 3836.11
GB 3836.12
GB 3836.13
GB 3836.14
GB 3836.15
GB/T 6404.1
GB/T 6414
GB/T 8542
GB/T 9115.1
GB/T 10095.1
GB/T 10095.2
GB/T 11351
GB/T 11352
GB/T 12469
GB/T 13306
GB/T 13384
GB/T 15826.1
JB/T 4127.1
JB/T 4730.2
JB/T 8421
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 5999-2024 — Volatile organic compound cyclone adsorption-condensation recovery device
HG/T 5998-2024 — Volatile organic compound cyclone adsorption-catalytic combustion device
HG/T 6187-2023 — Polypropylene dryers
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 92
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 699Quality carbon structure steels
- GB/T 700Carbon structural steels
- GB/T 985Basic forms and sizes of weld grooves for gas welding manual arc welding and gas--Shielded arc welding
- GB/T 1173Casting aluminum alloy
- GB/T 1174Cast bearing alloy
GB 3836.10
Similar standards
How to Download HG/T 3913-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 3913-2006
$145.00