Valid

HG/T 3871-2008Rubber - Determination of lead content - Dithizone photometric method (English PDF)

橡胶 铅含量的测定 双硫腙光度法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3871-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 23, 2008

Implementation date

October 1, 2008

Scope

HG/T 3871-2008 is the English-translated version of 橡胶 铅含量的测定 双硫腙光度法.

HG/T 3871-2008 is the Chinese chemical industry standard that describes how to determine the lead content of rubber by the dithizone photometric method.

It applies to raw rubber, compounds and vulcanizates whose lead content does not exceed 1000 mg/kg; samples above that level can still be measured if the mass of the test portion or the concentration of the solution is adjusted.

It quotes GB/T 4498, GB/T 15340 and GB/T 17783. It is a recommended document, classified G40 in the Chinese system and 83.060 internationally, and it replaces the 2006 edition HG/T 3871-2006. Issued on 23 April 2008, it has applied since 1 October 2008.

Found what you need?

Document preview — HG/T 3871-2008

National Standard of the People's Republic of China

ICS
83.060
Replacing
HG/T 3871-2006

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 3871-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 23 April 2008 and has been in force since 1 October 2008.

It replaces the earlier edition HG/T 3871-2006.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the Chinese chemical industry standard that describes how to determine the lead content of rubber by the dithizone photometric method. It applies to raw rubber, compounds and vulcanizates whose lead content does not exceed 1000 mg/kg; samples above that level can still be measured if the mass of the test portion or the concentration of the solution is adjusted. It quotes GB/T 4498, GB/T 15340 and GB/T 17783. It is a recommended document, classified G40 in the Chinese system and 83.060 internationally, and it replaces the 2006 edition HG/T 3871-2006.

HG/T 3871-2008 falls under ICS 83.060, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 4498

GB/T 15340

GB/T 17783

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 3871-2006 (earlier edition)

Standards on related subjects:

GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods

GB/T 3511-2018 — Rubber, vulcanized or thermoplastic -- Resistance to weathering

GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method

HG/T 3867-2008 — Vulcanized rubber - Determination of low temperature resistance coefficient in tension

HG/T 3866-2008 — Vulcanized rubber - Determination of low temperature resistance coefficient in compression

HG/T 3863-2008 — Ebonite - Determination of crushing strength

6 Classification and status

International classification (ICS): 83.060

Chinese Standard Classification (CCS): G 40

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3871

EditionTitleRevisionStatus
HG/T 3871-2008Rubber - Determination of lead content - Dithizone photometric methodcurrent editionCurrent
HG/T 3871-2006Rubber - Determination of lead content - Dithizone photometric methodprevious editionSuperseded

This page sells the current edition, HG/T 3871-2008. Earlier editions are listed for reference only.

How to Download HG/T 3871-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3871-2008

$145.00