Valid

HG/T 3839-2006Plastics - Test method for shear strength - Punch method (English PDF)

塑料剪切强度试验方法 穿孔法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3839-2006 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 27, 2006

Implementation date

October 11, 2006

Scope

HG/T 3839-2006 is the English-translated version of 塑料剪切强度试验方法 穿孔法.

HG/T 3839-2006, a recommended Chinese chemical industry standard, sets out how the shear strength of plastics is tested with a punch tool. A circular punch is driven through the specimen, and the force needed to shear the material in this compressive punching action gives the shear strength.

The method covers rigid thermoplastics and thermosets, including filled plastics and fibre-reinforced composites, but it does not cover foamed plastics. It quotes GB/T 1039 and GB/T 2918 and is classified G31 in the Chinese system, with the international classifications 83.080.01 and 83.040.01.

The standard supersedes GB/T 15598-1995. Issued on 27 July 2006, it has applied since 11 October 2006.

Found what you need?

Document preview — HG/T 3839-2006

National Standard of the People's Republic of China

ICS
83.080.01
Replacing
GB/T 15598-1995

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 3.1 Category A
  • 3.2 Category B
  • 4 Classification and designation
  • 4.1 General
  • 4.2 Character group 1
  • 4.3 Character group 2
  • 4.4 Character group 3
  • 4.5 Character group 4
  • 4.6 Designation example
  • 5 Test Methods
  • 5.1 Appearance requirements
  • 5.2 Technical requirements
  • 5.3 Environmental requirements
  • 6.1 Test conditions
  • 6.2 Test substrate
  • 6.3 Apparatus
  • 6.4 Appearance
  • 6.5 Coating property
  • 6.6 Shear elongation
  • 6.7 Tensile shear strength
  • 6.8 Tensile bond strength
  • 6.9 Free formaldehyde
  • 7 Inspection rules
  • 7.1 Inspection
  • 7.2 Batching
  • 7.3 Sampling
  • 7.4 Judgment of inspection results
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging
  • 8.3 Transportation
  • 8.4 Storage
  • 9 Packaging, transportation and storage

1 Foreword

HG/T 3839-2006 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 27 July 2006 and has been in force since 11 October 2006.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

HG/T 3839-2006, a recommended Chinese chemical industry standard, sets out how the shear strength of plastics is tested with a punch tool. A circular punch is driven through the specimen, and the force needed to shear the material in this compressive punching action gives the shear strength. The method covers rigid thermoplastics and thermosets, including filled plastics and fibre-reinforced composites, but it does not cover foamed plastics. It quotes GB/T 1039 and GB/T 2918 and is classified G31 in the Chinese system, with the international classifications 83.080.01 and 83.040.01. The standard supersedes GB/T 15598-1995.

HG/T 3839-2006 falls under ICS 83.080.01, in the field of rubber and plastics industries.

This catalogue holds 313 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 1039

GB/T 2918

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Standards on related subjects:

GB/T 3681.1-2021 — Plastics - Methods of exposure to solar radiation - Part 1: General guidance

GB/T 3960-2016 — Plastics—Test method for friction and wear by sliding

GB/T 3682-2000 — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

HG/T 4670-2014 — Determination of black specks and off-colour specks in flame retardants for plastics modification

HG/T 4574-2014 — Polyurethane material-Determination of foam reaction characteristic

HG/T 4453-2012 — Plastics - Technical specification for controlled use of plasticizers

6 Classification and status

International classification (ICS): 83.080.01

Chinese Standard Classification (CCS): G 32

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 3839

EditionTitleRevisionStatus
HG/T 3839-2006Plastics - Test method for shear strength - Punch methodcurrent editionCurrent
GB/T 15598-1995Plastics - Test method for shear strength - Punch methodprevious editionSuperseded

This page sells the current edition, HG/T 3839-2006. Earlier editions are listed for reference only.

How to Download HG/T 3839-2006

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3839-2006

$90.00