Valid

GB/T 32377-2015Dynamic punch-shear properties test method for fibre reinforced composites (English PDF)

纤维增强复合材料动态冲击剪切性能试验方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 32377-2015 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 31, 2015

Implementation date

November 1, 2016

Scope

GB/T 32377-2015 is the English-translated version of 纤维增强复合材料动态冲击剪切性能试验方法.

GB/T 32377-2015 is the Chinese standard "Dynamic punch-shear properties test method for fibre reinforced composites".

Its scope clause reads: This standard specifies the terms and definitions of the dynamic impact shear test of fiber reinforced composites, the test principle, the test equipment, the samples, Test conditions, test procedures, data calculations and test results and test reports.

This standard applies to the determination of the dynamic impact shear properties of fiber reinforced resin matrix composites, and other materials can also be used for reference.

Its clauses include normative reference documents; terms and definitions; test principle.

Found what you need?

Document preview — GB/T 32377-2015

National Standard of the People's Republic of China

ICS
83.120
Classification
Q 23

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • 1 Scope
  • 2 normative reference documents
  • 3 terms and definitions
  • 4 test principle

1 Scope

This standard specifies the terms and definitions of the dynamic impact shear test of fiber reinforced composites, the test principle, the test equipment, the samples,

Test conditions, test procedures, data calculations and test results and test reports.

This standard applies to the determination of the dynamic impact shear properties of fiber reinforced resin matrix composites, and other materials can also be used for reference.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this standard.

GB/T 1446 Fiber reinforced plastics - Test methods - General

3 terms and definitions

The following terms and definitions apply to this document.

3.1 Elastic longitudinal wave velocity

The Propagation Rate of Elastic Pitch in the Sections of Equal Cross Section.

3.2 Dynamic shock shear stress

The ratio of the shear load to the original shear area of the specimen at any moment during the impact shear process.

3.3 Dynamic shock shear displacement

The difference between the displacement of the end of the input rod and the end face of the output tube in contact with the specimen during the impact shearing process.

3.4 Dynamic impact shear strength

The maximum shear stress of the specimen during dynamic shock shear failure.

4 test principle

Based on the piecewise one-dimensional Hopkinson rod test principle, the striker strikes the input rod at a constant speed, forming an incident elasticity in the input rod

Compresses the stress wave and propagates forward, and loads the sample between the input rod and the output tube dynamically so as to shear the specimen along the thickness direction.

The elastic wave and the reflected wave are measured by the strain gauge on the input rod. The elastic transmission wave is measured by the strain gauge on the output pipe. According to the one-dimensional stress wave

Theory, calculate the dynamic impact shear stress and dynamic impact shear displacement of the specimen. The schematic diagram of the test device is shown in Fig.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

How to Download GB/T 32377-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 32377-2015

$145.00