Valid

HG/T 3829-2006Floor coatings (English PDF)

地坪涂料

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3829-2006 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

July 26, 2006

Implementation date

March 1, 2007

Scope

HG/T 3829-2006 is the English-translated version of 地坪涂料.

Floor coatings are the subject of HG/T 3829-2006, a recommended standard of the Chinese chemical industry. It fixes the terms and definitions used for these products and then their classification, their requirements, the test methods, the inspection rules and the rules for marking, packaging and storage.

The coatings concerned are those painted onto floors laid on cement, concrete, stone, steel or other such base surfaces, while water-based floor coatings and elastic floor coatings are left outside the scope.

Testing follows established paint and varnish methods including GB/T 1728-1979 (1989), GB/T 1731-1993, GB/T 1732-1993, GB/T 1733-1993, GB/T 1734-1993, GB/T 9271-1988 and GB/T 9274-1988, alongside ISO 7784-2:1997 and ISO 15184:1998. Issued on 26 July 2006, it has applied since 1 March 2007.

Found what you need?

Document preview — HG/T 3829-2006

National Standard of the People's Republic of China

ICS
87.040

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 3829-2006 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 26 July 2006 and has been in force since 1 March 2007.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

Floor coatings are the subject of HG/T 3829-2006, a recommended standard of the Chinese chemical industry. It fixes the terms and definitions used for these products and then their classification, their requirements, the test methods, the inspection rules and the rules for marking, packaging and storage. The coatings concerned are those painted onto floors laid on cement, concrete, stone, steel or other such base surfaces, while water-based floor coatings and elastic floor coatings are left outside the scope. Testing follows established paint and varnish methods including GB/T 1728-1979 (1989), GB/T 1731-1993, GB/T 1732-1993, GB/T 1733-1993, GB/T 1734-1993, GB/T 9271-1988 and GB/T 9274-1988, alongside ISO 7784-2:1997 and ISO 15184:1998.

HG/T 3829-2006 falls under ICS 87.040, in the field of paint and colour industries.

This catalogue holds 140 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 1250-1989 — Rules for expression and judgement of limiting values

GB/T 1728-1979 (1989)

GB/T 1731-1993 — Determination of flexibility of films

GB/T 1732-1993 — Determination of impact resistance of film

GB/T 1733-1993 — Determination of resistance to water of films

GB/T 1734-1993 — Determination of resistance to petrol of films

ISO 7784-2: 1997

GB/T 2411-1980 — Plastics--Shore hardness test

GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods

ISO 15184: 1998

GB/T 6751-1986 — Paints and varnishes--Determination of volatile and non-volatile matter

GB/T 9271-1988 — Paints and varnishes--Standard panels for testing

GB/T 9274-1988 — Paints and varnishes - Determination of resistance to liquids

GB 9278

4 Where this standard sits

It cites 14 standards, among them GB/T 1250-1989, GB/T 1731-1993, GB/T 1732-1993, listed in full above.

2 other standards in this catalogue cite it, among them GB/T 26825-2011, GB/T 36797-2018.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Standards on related subjects:

HJ 2537-2014 — Technical requirements for environmental labeling products - Water based coatings

HG/T 3952-2007 — Cathodic electrodeposition coatings

GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling

HG/T 4563-2025 — Non-stick coatings

HG/T 3950-2025 — Antimicrobial and antiviral coatings

HG/T 3830-2022 — Coil coatings

7 Classification and status

International classification (ICS): 87.040

Chinese Standard Classification (CCS): G 51

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 3829-2006

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3829-2006

$105.00