HG/T 3814-2006Sodium bisulfite for industrial use (English PDF)
工业亚硫酸氢钠
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3814-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 26, 2006
Implementation date
March 1, 2007
Scope
HG/T 3814-2006 is the English-translated version of 工业亚硫酸氢钠.
HG/T 3814-2006 is the Chinese standard "Sodium bisulfite for industrial use". Its scope clause reads: This standard specifies the requirements, test methods, inspection rules, marking, labeling, packaging, transportation, and storage of sodium bisulfite for industrial use.
This standard is applicable to sodium bisulfite for industrial use, which is mainly used for bleaching cotton fabrics and as a reducing agent in dyes, paper making, leather making, chemical synthesis, and other industries.
It may also be used to synthesize intermediates, antichlors, mordants, and depigmenting agents of organic drugs. Molecular formula: NaHSO3 Relative molecular mass: 104.06 (as per the international relative atomic mass in 2001). Its clauses include requirements; test methods.
Found what you need?
Document preview — HG/T 3814-2006
National Standard of the People's Republic of China
- ICS
- 71.060.50
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Requirements
- 4 Test methods
- 5 Inspection rules
- 6 Marking and labeling
- 7 Packaging, transportation and storage
1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, labeling, packaging, transportation, and storage of sodium bisulfite for industrial use.
This standard is applicable to sodium bisulfite for industrial use, which is mainly used for bleaching cotton fabrics and as a reducing agent in dyes, paper making, leather making, chemical synthesis, and other industries. It may also be used to synthesize intermediates, antichlors, mordants, and depigmenting agents of organic drugs.
Molecular formula: NaHSO3
Relative molecular mass: 104.06 (as per the international relative atomic mass in 2001)
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 191-2000 Packaging - Pictorial marking for handling of goods (eqv ISO 780: 1997)
GB/T 1250 Rules for expression and judgment of limiting values
GB/T 3049-1986 Chemical products for industrial use - General method for determination of iron content - o-Phenanthroline spectrophotometric method (eqv ISO 6685: 1982)
GB/T 3050-2000 Inorganic chemical products for industrial use - General method for determination of chloride content - Potentiometric method
GB/T 5009.74-2003 Method for limit test of heavy metals in food additives
GB/T 5009.76-2003 Determination of arsenic in food additives (Method II Gutzeit method)
GB/T 6678 General principles for sampling chemical products
GB/T 6682-1992 Water for analytical laboratory use - Specification and test methods (eqv ISO 3696: 1987)
GB/T 8946 Plastic woven sack
HG/T 3696.1 Inorganic chemical products - Preparations of standard volumetric solutions for chemical analysis
HG/T 3696.2 Inorganic chemical products - Preparations of standard solutions for chemical analysis
HG/T 3696.3 Inorganic chemical products - Preparations of reagent solutions for chemical analysis
3 Requirements
3.1 Appearance
Sodium bisulfite for industrial use is white crystal powder.
3.2
Sodium bisulfite for industrial use shall meet those specified in Table 1.
Table 1 Requirements
Item Index
Mass fraction of the main content (in SO2)/% 64.0 to 67.0
Mass fraction of water insoluble matter/% <= 0.03
Mass fraction of chloride (in Cl)/% <= 0.05
Mass fraction of iron (Fe)/% <= 0.004
Mass fraction of arsenic (As)/% <= 0.000 2
Mass fraction of the heavy metal (in Pb)/% <= 0.001 pH (50g/L solution) 4.0 to 5.0
4 Test methods
4.1 Safety instruction
Some of the reagents used in this test method are toxic or corrosive and must be handled with care. In case of splashing to the skin, rinse it immediately with water. In severe cases, seek medical treatment immediately. When flammable materials are used, open flame heating is strictly prohibited.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2000Graphical symbols marking for handling and storage of packages
- GB/T 1250Rules for expression and judgement of limiting values
- GB/T 3049-1986Chemical products for industrial use - General method for determination of iron content. 1, 10-Phenanthroline spectrophotometric method
- GB/T 3050-2000Inorganic chemical products for industrial use. General method for determination of chloride content. Potentiometric method
- GB/T 5009.74-2003Method for limit test of heavy metals in food additives
- GB/T 5009.76-2003Determination of arsenic in food additives
Similar standards
How to Download HG/T 3814-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1250-1989 — Rules for expression and judgement of limiting values
GB/T 191-2000 — Packaging-Pictorial marking for handling of goods
GB/T 3049-1986 — Chemical products for industrial use--General method for determination of iron content--0-phenanthroline spectrophotometric method
HG/T 3814-2006
$105.00