HG/T 3802-2014Industrial conductivity meters (English PDF)
工业电导仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3802-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 24, 2014
Implementation date
June 1, 2015
Scope
HG/T 3802-2014 is the English-translated version of 工业电导仪.
HG/T 3802-2014 is the Chinese chemical industry standard for industrial conductivity meters, the instruments also described as conductivity transmitters.
It gives their classification and basic parameters, the requirements, the test methods and the inspection rules, and it covers as well the nameplate, the instructions for use, the packaging, the transport and the storage.
The standard applies to conductivity meters built for industrial service. It quotes GB 3836.1, GB 3836.4, GB 4208 and GB/T 2423.4, GB/T 6587, GB/T 9969 and GB/T 13384.
It replaces HG/T 3802-2005. Issued on 24 December 2014, it has applied since 1 June 2015.
Found what you need?
Document preview — HG/T 3802-2014
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 3802-2005
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3802-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 December 2014 and has been in force since 1 June 2015.
It replaces the earlier edition HG/T 3802-2005.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese chemical industry standard for industrial conductivity meters, the instruments also described as conductivity transmitters. It gives their classification and basic parameters, the requirements, the test methods and the inspection rules, and it covers as well the nameplate, the instructions for use, the packaging, the transport and the storage. The standard applies to conductivity meters built for industrial service. It quotes GB 3836.1, GB 3836.4, GB 4208 and GB/T 2423.4, GB/T 6587, GB/T 9969 and GB/T 13384. It replaces HG/T 3802-2005.
HG/T 3802-2014 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 3836.1-2010 — [Replaced by GB/T 3836.1-2021] Explosive atmospheres - Part 1: Equipment - General requirements
GB 3836.4-2010 — [Replaced by GB/T 3836.4-2021] Explosive atmospheres - Part 4: Equipment protection by intrinsic safety i
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB/T 2423.4
GB/T 6587
GB/T 9969
GB/T 13384
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3802-2005 (earlier edition)
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
HG/T 3105-2009 — Vitreous and porcelain enamels for sheet steel. Production of specimens for testing
HG/T 2742-2026 — Magnetic float level gauge
HG/T 2072-2026 — Micro-rubber international hardness tester
HG/T 2067-2026 — Rubber dynamic fatigue testing machine
6 Classification and status
International classification (ICS): 71.120
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 3836.1-2010[Replaced by GB/T 3836.1-2021] Explosive atmospheres - Part 1: Equipment - General requirements
- GB 3836.4-2010[Replaced by GB/T 3836.4-2021] Explosive atmospheres - Part 4: Equipment protection by intrinsic safety i
- GB 4208-2008Degrees of Protection Provided By Enclosure (IP Code)
- GB/T 2423.4Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- GB/T 6587General specification for electronic measuring instruments
- GB/T 9969General principles for preparation of instructions for use of industrial products
Similar standards
Editions of HG/T 3802
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3802-2014 | Industrial conductivity meters | current edition | Current |
| HG/T 3802-2005 | Industrial conductivity meters | previous edition | Superseded |
This page sells the current edition, HG/T 3802-2014. Earlier editions are listed for reference only.
How to Download HG/T 3802-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 3836.1-2010 — [Replaced by GB/T 3836.1-2021] Explosive atmospheres - Part 1: Equipment - General requirements
GB 3836.4-2010 — [Replaced by GB/T 3836.4-2021] Explosive atmospheres - Part 4: Equipment protection by intrinsic safety i
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
HG/T 3802-2014
$90.00