HG/T 3400-2001Dyestuffs - Determination of granule fineness (English PDF)
染料颗粒细度的测定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3400-2001 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 24, 2002
Implementation date
July 1, 2002
Scope
HG/T 3400-2001 is the English-translated version of 染料颗粒细度的测定.
HG/T 3400-2001 is the recommended chemical industry standard that describes how the granule fineness of a dye is determined. The method it specifies is direct counting under the microscope.
Its field of use is commercial disperse dyes and vat dyes, whose particle fineness is measured in this way. The document sits in classification G55 and under ICS 71.100.01 and 87.060.10, among the general test methods written for dyes rather than for any single colorant.
Water used in the determination is of the grade defined in GB/T 6682-1992. The standard replaces HG/T 3400-1981. Issued on 24 January 2002, it has applied since 1 July 2002.
Found what you need?
Document preview — HG/T 3400-2001
National Standard of the People's Republic of China
- ICS
- 71.100.01
- Replacing
- HG/T 3400-1981
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3400-2001 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 January 2002 and has been in force since 1 July 2002.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended chemical industry standard that describes how the granule fineness of a dye is determined. The method it specifies is direct counting under the microscope. Its field of use is commercial disperse dyes and vat dyes, whose particle fineness is measured in this way. The document sits in classification G55 and under ICS 71.100.01 and 87.060.10, among the general test methods written for dyes rather than for any single colorant. Water used in the determination is of the grade defined in GB/T 6682-1992. The standard replaces HG/T 3400-1981.
HG/T 3400-2001 falls under ICS 71.100.01, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
4 Where this standard sits
It cites one other standard, GB/T 6682-1992, listed in full above.
One other standard in this catalogue cites it: HG/T 2555-2010.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Standards on related subjects:
GB/T 23978-2020 — Determination of chloride in water-soluble dyes
GB/T 2374-2017 — Dyestuffs - General rules for the dyeing test
GB 19601-2013 — Limit and determination of 23 harmful aromatic amines in dye products
HG/T 6216-2023 — Liquid dyes - Determination of freeze-thaw stability
HG/T 6208-2023 — Dyestuffs - Determination of storage stability
HG/T 2687-2021 — Control requirements for reference samples used in determination of dye shade and strength
7 Classification and status
International classification (ICS): 71.100.01
Chinese Standard Classification (CCS): G 55
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 3400
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3400-2001 | Dyestuffs - Determination of granule fineness | current edition | Current |
| HG/T 3400-1981 | Dyestuffs - Determination of granule fineness | previous edition | Superseded |
This page sells the current edition, HG/T 3400-2001. Earlier editions are listed for reference only.
How to Download HG/T 3400-2001
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 6682-1992 — Water for analytical laboratory use--Specification and test methods
HG/T 2016-2026 — Rubber-soled sports shoes for basketball and volleyball
HG/T 2018-2026 — Lightweight rubber shoes
HG/T 3400-2001
$40.00