Valid

HG/T 3323-2008Determination of viscosity of rubber cement (rotational viscometer method) (English PDF)

橡胶浆粘度测定方法(旋转粘度计法)

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 3323-2008 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 1, 2008

Implementation date

July 1, 2008

Scope

HG/T 3323-2008 is the English-translated version of 橡胶浆粘度测定方法(旋转粘度计法).

HG/T 3323-2008 is the Chinese chemical industry standard covering determination of viscosity of rubber cement (rotational viscometer method). It was issued on 1 February 2008 and has been in force since 1 July 2008, replacing HG/T 3323-1982.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2008 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — HG/T 3323-2008

National Standard of the People's Republic of China

Replacing
HG/T 3323-1982

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 3323-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 1 February 2008 and has been in force since 1 July 2008.

It replaces the earlier edition HG/T 3323-1982.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

HG/T 3323-2008 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,854 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other editions:

HG/T 3323-1982 (earlier edition)

Standards on related subjects:

GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods

GB/T 3511-2018 — Rubber, vulcanized or thermoplastic -- Resistance to weathering

GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method

HG/T 2821.2-2022 — Rubberized polyester cords for V-belts and V-belts - Part 2: Soft cords

HG/T 3322-2012 — Rubber, vulcanized - Determination of tension set at a given elongation (modulus tester method)

HG/T 3321-2012 — Rubber, vulcanized - Determination of elastic modulus

5 Classification and status

Chinese Standard Classification (CCS): G 40

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of HG/T 3323

EditionTitleRevisionStatus
HG/T 3323-2008Determination of viscosity of rubber cement (rotational viscometer method)current editionCurrent
HG/T 3323-1982Determination of viscosity of rubber cement (rotational viscometer method)previous editionSuperseded

This page sells the current edition, HG/T 3323-2008. Earlier editions are listed for reference only.

How to Download HG/T 3323-2008

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 3323-2008

$130.00