HG/T 3233-2009Flap curing presses (English PDF)
垫带硫化机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3233-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 4, 2009
Implementation date
June 1, 2010
Scope
HG/T 3233-2009 is the English-translated version of 垫带硫化机.
HG/T 3233-2009 is a recommended chemical industry standard of China for flap curing presses, the machines on which tyre flaps are vulcanised. It fixes the basic parameters of the press, its technical requirements, its safety requirements, the test methods and the inspection rules.
Its scope is the hydraulic type of flap curing press. The standard quotes GB/T 191, GB/T 1184-1996, GB/T 2346, GB 5226.1, GB/T 12783, GB/T 13306, GB/T 13384, HG/T 3120 and HG/T 3228.
It supersedes HG/T 3233-1989. Issued on 4 December 2009, it has applied since 1 June 2010.
Found what you need?
Document preview — HG/T 3233-2009
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 3233-1989
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3233-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.
It replaces the earlier edition HG/T 3233-1989.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended chemical industry standard of China for flap curing presses, the machines on which tyre flaps are vulcanised. It fixes the basic parameters of the press, its technical requirements, its safety requirements, the test methods and the inspection rules. Its scope is the hydraulic type of flap curing press. The standard quotes GB/T 191, GB/T 1184-1996, GB/T 2346, GB 5226.1, GB/T 12783, GB/T 13306, GB/T 13384, HG/T 3120 and HG/T 3228. It supersedes HG/T 3233-1989.
HG/T 3233-2009 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 2346
GB/T 12783
GB/T 13306
GB/T 13384
GB 5226.1
HG/T 3120
HG/T 3228
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 3233-1989 (earlier edition)
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
HG/T 3227.2-2020 — Moulds for tyre covers - Part 2: Two-piece moulds
HG/T 3227.1-2020 — Moulds for tyre covers - Part 1: Segmented moulds
HG/T 3226.2-2011 — Tyre building drums - Part 2: Expandable and collapsible drums
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 95
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 2346Fluid power systems and components -- Nominal pressures
- GB/T 12783Editorial nominating method for the modeldesignation of rubber and plastics machinery
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
Similar standards
Editions of HG/T 3233
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3233-2009 | Flap curing presses | current edition | Current |
| HG/T 3233-1989 | Flap curing presses | previous edition | Superseded |
This page sells the current edition, HG/T 3233-2009. Earlier editions are listed for reference only.
How to Download HG/T 3233-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
HG/T 3233-2009
$145.00