HG/T 3226.1-2009Tyre building drums - Part 1: Collapsible drums (English PDF)
轮胎成型机头 第1部分:折叠式机头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3226.1-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 4, 2009
Implementation date
June 1, 2010
Scope
HG/T 3226.1-2009 is the English-translated version of 轮胎成型机头 第1部分:折叠式机头.
HG/T 3226.1-2009 is the first part of the recommended Chinese chemical industry standard on tyre building drums, and it deals with collapsible drums. The part sets terms and definitions, model designations and basic parameters, requirements, testing, inspection rules and the provisions for marking, packaging, transport and storage.
It applies to collapsible drums with an outside diameter below 2120 mm and a width below 3180 mm, including full drums, half drums and the wheeled and half-wheeled core types.
GB/T 1800.4-1999, GB/T 1801-1999, GB/T 6326, GB/T 12783, GB/T 13306, GB/T 13384 and HG/T 3223 are quoted in it. It supersedes HG/T 3226-1987. Issued on 4 December 2009, it has applied since 1 June 2010.
Found what you need?
Document preview — HG/T 3226.1-2009
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 3226-1987
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 3226.1-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.
It is one of 3 parts of the HG/T 3226 series.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the first part of the recommended Chinese chemical industry standard on tyre building drums, and it deals with collapsible drums. The part sets terms and definitions, model designations and basic parameters, requirements, testing, inspection rules and the provisions for marking, packaging, transport and storage. It applies to collapsible drums with an outside diameter below 2120 mm and a width below 3180 mm, including full drums, half drums and the wheeled and half-wheeled core types. GB/T 1800.4-1999, GB/T 1801-1999, GB/T 6326, GB/T 12783, GB/T 13306, GB/T 13384 and HG/T 3223 are quoted in it. It supersedes HG/T 3226-1987.
HG/T 3226.1-2009 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 1801-1999 — Limits and fits Selection of tolerance zones and fits
GB/T 1800.4-1999 — General rules for roler sanders
GB/T 6326
GB/T 12783
GB/T 13306
GB/T 13384
HG/T 3223
4 Where this standard sits
It cites 7 standards, among them GB/T 1801-1999, GB/T 18004-1999, listed in full above.
It is one part of the HG/T 3226 series, of which this catalogue holds 3 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 3226-1987 — Tyre building drums
HG/T 3226.2-2011 — Tyre building drums - Part 2: Expandable and collapsible drums
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
HG/T 3227.2-2020 — Moulds for tyre covers - Part 2: Two-piece moulds
HG/T 3227.1-2020 — Moulds for tyre covers - Part 1: Segmented moulds
7 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 95
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1801-1999Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits
- GB/T 1800.4-1999Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
- GB/T 6326Tyre - Vocabulary
- GB/T 12783Editorial nominating method for the modeldesignation of rubber and plastics machinery
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
Similar standards
Editions of HG/T 3226.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3226.1-2009 | Tyre building drums - Part 1: Collapsible drums | current edition | Current |
| HG/T 3226-1987 | Tyre building drums - Part 1: Collapsible drums | previous edition | Superseded |
This page sells the current edition, HG/T 3226.1-2009. Earlier editions are listed for reference only.
How to Download HG/T 3226.1-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 12783-1991 — Editorial nominating method for the model designation of rubber and plastics machinery
GB/T 12783-2000 — Editorial nominating method for the modeldesignation of rubber and plastics machinery
GB/T 13306-1991 — Plates
HG/T 3226.1-2009
$85.00