HG/T 3139.7-2018Vertical reducers for vessels - Type ZF right-angle cylindrical-bevel gear reducers (English PDF)
釜用立式减速机 ZF系列直圆柱圆锥齿轮减速机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3139.7-2018 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 22, 2018
Implementation date
April 1, 2019
Scope
HG/T 3139.7-2018 is the English-translated version of 釜用立式减速机 ZF系列直圆柱圆锥齿轮减速机.
HG/T 3139.7-2018 is the Chinese chemical industry standard covering vertical reducers for vessels - Type ZF right-angle cylindrical-bevel gear reducers. It was issued on 22 October 2018 and has been in force since 1 April 2019, replacing HG/T 3139.7-2001.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2018 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — HG/T 3139.7-2018
National Standard of the People's Republic of China
- Replacing
- HG/T 3139.7-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 3139.7-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 October 2018 and has been in force since 1 April 2019.
It replaces the earlier edition HG/T 3139.7-2001.
It is one of 15 parts of the HG/T 3139 series.
2 Scope Preview
HG/T 3139.7-2018 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,854 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
HG/T 3139.1-2001 — Types and basic parameters
HG/T 3139.1-2018 — Types and basic parameters
HG/T 3139.2-2001 — Series XL cycloidal pinwheel reducers
HG/T 3139.3-2001 — Series LC cylindrical gear reducers
HG/T 3139.4-2001 — Series LPJ cylindrical gear reducers
HG/T 3139.4-2018 — LP parallel shaft gear reducers
HG/T 3139.5-2001 — Series FJ cylindrical and bevel gear reducers
HG/T 3139.6-2001 — Series DC cylindrical gear reducers
HG/T 3139.6-2018 — CF cylindrical gear reducers
HG/T 3139.8-2001 — Series CW cylindrical gear and circular-arc cylindrical worm reducers
HG/T 3139.9-2001 — Series P belt drive reducers
HG/T 3139.10-2001 — Series FP belt drive reducers
HG/T 3139.11-2001 — Series YP belt drive reducers
HG/T 3139.12-2001 — Series KJ movable cylindrical gear reducers
Other editions:
HG/T 3139.7-2001 (earlier edition)
Standards on related subjects:
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
5 Classification and status
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of HG/T 3139.7
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 3139.7-2018 | Vertical reducers for vessels - Type ZF right-angle cylindrical-bevel gear reducers | current edition | Current |
| HG/T 3139.7-2001 | Vertical reducers for vessels - Type ZF right-angle cylindrical-bevel gear reducers | previous edition | Superseded |
This page sells the current edition, HG/T 3139.7-2018. Earlier editions are listed for reference only.
How to Download HG/T 3139.7-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG/T 3139.8-2001 — Vertical reducers for vessels - Series CW cylindrical gear and circular-arc cylindrical worm reducers
HG/T 3139.6-2001 — Vertical reducers for vessels - Series DC cylindrical gear reducers
HG/T 3139.9-2001 — Vertical reducers for vessels - Series P belt drive reducers
HG/T 3139.7-2018
$255.00