HG/T 2952-2023Technical requirements for urea carbon dioxide stripping columns (English PDF)

1 Scope

This standard specifies the symbols, design and manufacturing, inspection and test methods, and factory requirements for urea carbon dioxide stripping towers in urea plants.

Foreword

This document was issued on 29 December 2023 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 July 2024.

It replaces HG/T 2952-2003.

About this edition

HG/T 2952-2023 is the current edition. It was issued on 29 December 2023 and has been in force since 1 July 2024, replacing HG/T 2952-2003.

HG/T 2952-2003 has been superseded: a specification that still cites it is citing a withdrawn edition.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

HG/T 2952-2023 replaces HG/T 2952-2003. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

HG/T 2952-2023 carries no ICS number in the official record.

The HG/T prefix marks a recommended standard of China's chemical industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

How this standard is designated

The full designation is HG/T 2952-2023. A citation should carry the number with its year, because the year identifies the text that applies.