HG/T 2728-2012Rubber - Determination of density - Direct reading method (English PDF)
橡胶密度的测定 直读法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2728-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
HG/T 2728-2012 is the English-translated version of 橡胶密度的测定 直读法.
HG/T 2728-2012 is the Chinese chemical industry standard that describes how the density of rubber is measured with a direct-reading densimeter. Two procedures are given: method A uses a mechanical direct-reading instrument, and method B uses an electronic one.
The standard is directed at rubber whose density falls in the range the instruments can read directly. It quotes GB/T 2941, and the work is classified under G40 in the Chinese scheme and under ICS 83.060.
This edition supersedes HG/T 2728-1995. Issued on 24 May 2012, it has applied since 1 November 2012.
Found what you need?
Document preview — HG/T 2728-2012
National Standard of the People's Republic of China
- ICS
- 83.060
- Replacing
- HG/T 2728-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 2728-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
It replaces the earlier edition HG/T 2728-1995.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the Chinese chemical industry standard that describes how the density of rubber is measured with a direct-reading densimeter. Two procedures are given: method A uses a mechanical direct-reading instrument, and method B uses an electronic one. The standard is directed at rubber whose density falls in the range the instruments can read directly. It quotes GB/T 2941, and the work is classified under G40 in the Chinese scheme and under ICS 83.060. This edition supersedes HG/T 2728-1995.
HG/T 2728-2012 falls under ICS 83.060, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 2941
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2728-1995 (earlier edition)
Standards on related subjects:
GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
GB/T 3511-2018 — Rubber, vulcanized or thermoplastic -- Resistance to weathering
GB/T 3512-2014 — Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests -- Air-oven method
HG/T 3866-2026 — Vulcanized rubber-Determination of coefficient of cold resistance under compression
HG/T 2196-2026 — Standard classification system for rubber products in automotive application
HG/T 2729-2012 — Determination of friction coefficient between vulcanized rubber and sheet - Sliding method
6 Classification and status
International classification (ICS): 83.060
Chinese Standard Classification (CCS): G 40
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 2728
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2728-2012 | Rubber - Determination of density - Direct reading method | current edition | Current |
| HG/T 2728-1995 | Rubber - Determination of density - Direct reading method | previous edition | Superseded |
This page sells the current edition, HG/T 2728-2012. Earlier editions are listed for reference only.
How to Download HG/T 2728-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2941-1991 — Rubber-Standard temperatures, humidities and times for the conditioning environmental and testing of test pieces
GB/T 2941-2006 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
GB/T 2941-2025 — Rubber - General procedures for preparing and conditioning test pieces for physical test methods
HG/T 2728-2012
$105.00