HG/T 2703-2007Trapezoidal-tooth synchronous belts for light duty power transmission (English PDF)
小功率梯形齿同步带
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2703-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
September 22, 2007
Implementation date
April 1, 2008
Scope
HG/T 2703-2007 is the English-translated version of 小功率梯形齿同步带.
Trapezoidal-tooth synchronous belts for light duty power transmission are the subject of HG/T 2703-2007, a recommended chemical industry standard that corresponds on a non-equivalent basis to ISO 12046-1995.
It covers the product categories, the construction and the materials, the designation of the belts, the requirements, the test methods and the inspection rules, and it ends with marking, packaging, transport and storage.
Endless trapezoidal-tooth timing belts used for light duty mechanical power transmission are what it applies to. GB/T 10716 and GB/T 11616 are quoted. It replaces HG/T 2703-1995. Issued on 22 September 2007, it has applied since 1 April 2008.
Found what you need?
Document preview — HG/T 2703-2007
National Standard of the People's Republic of China
- ICS
- 83.140.01
- Replacing
- HG/T 2703-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 2703-2007 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 September 2007 and has been in force since 1 April 2008.
It replaces the earlier edition HG/T 2703-1995.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
Trapezoidal-tooth synchronous belts for light duty power transmission are the subject of HG/T 2703-2007, a recommended chemical industry standard that corresponds on a non-equivalent basis to ISO 12046-1995. It covers the product categories, the construction and the materials, the designation of the belts, the requirements, the test methods and the inspection rules, and it ends with marking, packaging, transport and storage. Endless trapezoidal-tooth timing belts used for light duty mechanical power transmission are what it applies to. GB/T 10716 and GB/T 11616 are quoted. It replaces HG/T 2703-1995.
HG/T 2703-2007 falls under ICS 83.140.01, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 10716
GB/T 11616
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2703-1995 (earlier edition)
Standards on related subjects:
GB/T 3683-2023 — Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
GB/T 3685-2017 — Conveyor belts -- Laboratory scale flammability characteristics -- Test method
GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
HG/T 2014-2025 — Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects
HG/T 3047-2024 — Determination of air permeability of rubber or plastic coated fabrics
HG/T 2490-2023 — Rubber hoses and hose assemblies, wire or textile reinforced, for dredging - Specification
6 Classification and status
International classification (ICS): 83.140.01
Chinese Standard Classification (CCS): G 42
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of HG/T 2703
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2703-2007 | Trapezoidal-tooth synchronous belts for light duty power transmission | current edition | Current |
| HG/T 2703-1995 | Trapezoidal-tooth synchronous belts for light duty power transmission | previous edition | Superseded |
This page sells the current edition, HG/T 2703-2007. Earlier editions are listed for reference only.
How to Download HG/T 2703-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10716-1989 — Synchronous belt--Test method for tensile properties
GB/T 10716-2000 — Synchronous belt drives-Automotive belt-Determination of physical properties
GB/T 10716-2012 — Synchronous belt drives -- Automotive belts -- Determination of physical properties
HG/T 2703-2007
$140.00