HG/T 2649-2011En-masse scraper conveyors for return soda (English PDF)
返碱埋刮板输送机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2649-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 20, 2011
Implementation date
July 1, 2012
Scope
HG/T 2649-2011 is the English-translated version of 返碱埋刮板输送机.
En-masse scraper conveyors handling return soda are covered by HG/T 2649-2011, a recommended standard of the chemical industry. It gives the types of conveyor and their basic parameters, the requirements, the test methods, the inspection rules, the rust prevention and painting, and the marking, packaging, transport and storage provisions.
The conveyors it applies to are installed at an angle of less than 30 degrees, carry return soda at a temperature of not more than 250 °C, and work with externally steam-heated calciners.
GB/T 699, GB/T 985.1, GB/T 1801, GB/T 1804, GB/T 3077, the GB/T 10596 parts and GB/T 11352 are among the quoted references. It replaces HG/T 2649-1995. Issued on 20 December 2011, it has applied since 1 July 2012.
Found what you need?
Document preview — HG/T 2649-2011
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 2649-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 2649-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.
It replaces the earlier edition HG/T 2649-1995.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
En-masse scraper conveyors handling return soda are covered by HG/T 2649-2011, a recommended standard of the chemical industry. It gives the types of conveyor and their basic parameters, the requirements, the test methods, the inspection rules, the rust prevention and painting, and the marking, packaging, transport and storage provisions. The conveyors it applies to are installed at an angle of less than 30 degrees, carry return soda at a temperature of not more than 250 °C, and work with externally steam-heated calciners. GB/T 699, GB/T 985.1, GB/T 1801, GB/T 1804, GB/T 3077, the GB/T 10596 parts and GB/T 11352 are among the quoted references. It replaces HG/T 2649-1995.
HG/T 2649-2011 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 699
GB/T 985.1
GB/T 1801
GB/T 1804
GB/T 2649
GB/T 2651
GB/T 3077
GB/T 10596.1
GB/T 10596.2
GB/T 10596.3
GB/T 11352
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2649-1995 (earlier edition)
Standards on related subjects:
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 6489-2026 — Chemical engineering machine and equipments - Pin-type powder materials pelletizer
HG/T 4086-2026 — Stop valve for biochemical processes
HG/T 3650-2026 — Flue gas turbine
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 92
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 699Quality carbon structure steels
- GB/T 985.1Recommended joint preparation for gas welding, manual metal arc welding, gas-shield arc welding and beam welding
- GB/T 1801Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 2649Methods of sampling for mechanical properties tests of welded joint
- GB/T 2651Destructive tests on welds in metallic materials - Transverse tensile test
Similar standards
Editions of HG/T 2649
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2649-2011 | En-masse scraper conveyors for return soda | current edition | Current |
| HG/T 2649-1995 | En-masse scraper conveyors for return soda | previous edition | Superseded |
This page sells the current edition, HG/T 2649-2011. Earlier editions are listed for reference only.
How to Download HG/T 2649-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 2649-2011
$245.00