Valid

HG/T 2434-2018Technical specifications for glass-lined valves (English PDF)

搪玻璃阀门技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2434-2018 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

October 22, 2018

Implementation date

April 1, 2019

Scope

HG/T 2434-2018 is the English-translated version of 搪玻璃阀门技术条件.

HG/T 2434-2018 is the recommended Chinese chemical industry standard for glass-lined valves. It sets the requirements for the valves and the rules for assembly, pressure testing, acceptance, marking, packaging, storage and transport.

It applies to glass-lined upper discharge valves, lower discharge valves, ball valves and flat valves with a nominal pressure of 1.0 MPa or less and a design temperature from -20 °C to 200 °C. It quotes GB/T 7991.5, GB/T 7991.6, GB/T 9439-2010, GB/T 12220, GB/T 12221, GB/T 12226, GB/T 12229-2005, GB/T 13927, GB 25025, HG/T 20592, JB/T 7927 and JB/T 7928.

It replaces HG/T 2434-2012. Issued on 22 October 2018, it has applied since 1 April 2019.

Found what you need?

Document preview — HG/T 2434-2018

National Standard of the People's Republic of China

ICS
71.120
Replacing
HG/T 2434-2012

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 2434-2018 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 22 October 2018 and has been in force since 1 April 2019.

It replaces the earlier edition HG/T 2434-2012, HG/T 2434-2005, HG/T 2434-1993.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is the recommended Chinese chemical industry standard for glass-lined valves. It sets the requirements for the valves and the rules for assembly, pressure testing, acceptance, marking, packaging, storage and transport. It applies to glass-lined upper discharge valves, lower discharge valves, ball valves and flat valves with a nominal pressure of 1.0 MPa or less and a design temperature from -20 °C to 200 °C. It quotes GB/T 7991.5, GB/T 7991.6, GB/T 9439-2010, GB/T 12220, GB/T 12221, GB/T 12226, GB/T 12229-2005, GB/T 13927, GB 25025, HG/T 20592, JB/T 7927 and JB/T 7928. It replaces HG/T 2434-2012.

HG/T 2434-2018 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB/T 7991.5

GB/T 7991.6

GB/T 9439-2010 — Grey iron castings

GB/T 12220

GB/T 12221

GB/T 12226

GB/T 12229-2005 — General purpose industrial valves - Specification of spheroidal graphite iron castings

GB/T 13927

GB 25025

HG/T 20592

JB/T 7927

JB/T 7928

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 2434-2012 (earlier edition)

HG/T 2434-2005 (earlier edition)

HG/T 2434-1993 (earlier edition)

Standards on related subjects:

GB/T 7996-2020 — Norminal capacity and diameter of glass-lined equipment

GB/T 23711.1-2019 — Test method for pressure vessels lined with plastics—Part 1:Spark testing

HG/T 2377-2009 — Virteous and porlelain enamels. Determination of resistance to boiling water and vapouy

HG/T 2055.1-2024 — Glass-lined manhole

HG/T 2437-2024 — General technical conditions for plastic-lined composite steel pipes and fittings

HG/T 2433-2024 — Liquid level gauge for glass-lined equipment

6 Classification and status

International classification (ICS): 71.120

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2434

EditionTitleRevisionStatus
HG/T 2434-2018Technical specifications for glass-lined valvescurrent editionCurrent
HG/T 2434-2012Technical specifications for glass-lined valvesprevious editionSuperseded

This page sells the current edition, HG/T 2434-2018. Earlier editions are listed for reference only.

How to Download HG/T 2434-2018

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2434-2018

$85.00