HG/T 21581-2012Instrument hook-up drawings (Volumes I and II) (English PDF)
自控安装图册上下册
This is a limited preview
Buy now to download the full PDF (333 pages)
Need quotation for your management?
Get a formal quotation for HG/T 21581-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
HG/T 21581-2012 is the English-translated version of 自控安装图册上下册.
HG/T 21581-2012 is the Chinese chemical industry standard on instrument hook-up drawings, published in two volumes. It provides the drawings used to show how field instruments are connected to the process piping and equipment in chemical plant design.
Its content is tied to the chemical industry design documents HG/T 20636-1998 through HG/T 20639-1998 and to the HG/T 20592-2009 series of pipe flanges, as well as to GB/T 1047-2005, GB/T 1048-2005 and ASME B16.5-2009.
Classified under CCS G93 and ICS 71.120, it belongs to the engineering design documentation of the instrumentation discipline. The edition replaces HG/T 21581-1995. Issued on 24 May 2012, it has applied since 1 November 2012.
Found what you need?
Document preview — HG/T 21581-2012
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 21581-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 21581-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 24 May 2012 and has been in force since 1 November 2012.
It replaces the earlier edition HG/T 21581-1995.
This standard hook-up is prepared under organization of the National Chemical Automatic Control Design and Technology Center Station commissioned by the China Petroleum & Chemical Engineering Survey and Design Association according to the requirements of the National Development and Reform Commission (Document FAGAIBANGONGYE [2004] No.872) and the China Petroleum & Chemical Engineering Survey and Design Association (Document ZHONGSHIHUAXIEKEFA [2004] No.155).
This standard hook-up replaces HG/T 21581-1995 Instrument hook-up from the implementation date hereof.
2 Scope Preview
This standard is the Chinese chemical industry standard on instrument hook-up drawings, published in two volumes. It provides the drawings used to show how field instruments are connected to the process piping and equipment in chemical plant design. Its content is tied to the chemical industry design documents HG/T 20636-1998 through HG/T 20639-1998 and to the HG/T 20592-2009 series of pipe flanges, as well as to GB/T 1047-2005, GB/T 1048-2005 and ASME B16.5-2009. Classified under CCS G93 and ICS 71.120, it belongs to the engineering design documentation of the instrumentation discipline. The edition replaces HG/T 21581-1995.
HG/T 21581-2012 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
HG/T 20636-1998
HG/T 20637-1998
HG/T 20638-1998 — Specification for details of engineering design of instrumentation
HG/T 20639-1998
GB/T 1048-2005 — Pipework components - Definition and selection of PN
GB/T 1047-2005 — Pipework components - Definition and selection of DN (nominal size)
HG/T 20592-2009 — Steel Pipe Flanges
HG/T 20593-2009
HG/T 20594-2009
HG/T 20595-2009
HG/T 20596-2009
HG/T 20597-2009
HG/T 20598-2009
HG/T 20599-2009
4 Where this standard sits
It cites 14 standards, among them HG/T 20638-1998, GB/T 1048-2005, GB/T 1047-2005, listed in full above.
One other standard in this catalogue cites it: GB/T 41800-2022.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 333 pages
6 Related standards
Other editions:
HG/T 21581-1995 (earlier edition)
Standards on related subjects:
HG/T 4752-2014 — Vinyl ester resin concrete electrolytic cell made by monolithic casting
HG/T 20584-2011 — Technical requirements for fabrication of steel chemical vessels
HG/T 3914-2006 — Steam tube rotary drum dryers
HG/T 20524-2024 — Code for design of chemical dosing units for recirculating cooling water treatment in chemical enterprises
HG/T 20581-2020 — Code for material selection of steel chemical vessels
HG/T 20580-2020 — Code for basic design of steel chemical vessels
7 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 93
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 333 pages — is available in the English PDF.
Referenced standards
Normative references
- HG/T 20638-1998Code for depth of instrumentation engineering design documents for chemical plants
- GB/T 1048-2005Pipework components - Definition and selection of nominal pressure
- GB/T 1047-2005Pipework components - Definition and selection of nominal size
- HG/T 20592-2009Steel Pipe Flanges
- HG/T 20593-2009Technical specification for welding and inspection of steel chemical equipment (with clause explanation)
HG/T 20636-1998 · HG/T 20637-1998 · HG/T 20639-1998 · HG/T 20594-2009 · HG/T 20595-2009 · HG/T 20596-2009 · HG/T 20597-2009 · HG/T 20598-2009 · HG/T 20599-2009
Editions of HG/T 21581
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 21581-2012 | Instrument hook-up drawings (Volumes I and II) | current edition | Current |
| HG/T 21581-1995 | Instrument hook-up drawings (Volumes I and II) | previous edition | Superseded |
This page sells the current edition, HG/T 21581-2012. Earlier editions are listed for reference only.
How to Download HG/T 21581-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1047-2005 — Pipework components - Definition and selection of DN (nominal size)
GB/T 1048-2005 — Pipework components - Definition and selection of PN
HG/T 20592-2009 — Steel Pipe Flanges
Secure payment via Stripe
Payments accepted
HG/T 21581-2012
$1,900.00