HG/T 21559.1-2013Engineering technical specification for stainless steel perforated-mesh corrugated structured packings (English PDF)
不锈钢网孔板波纹填料工程技术规范
This is a limited preview
Buy now to download the full PDF (36 pages)
Need quotation for your management?
Get a formal quotation for HG/T 21559.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 17, 2013
Implementation date
March 1, 2014
Scope
HG/T 21559.1-2013 is the English-translated version of 不锈钢网孔板波纹填料工程技术规范.
HG/T 21559.1-2013 is the recommended Chinese chemical industry standard for stainless steel punched-mesh corrugated-sheet structured packings used in mass transfer columns.
It sets out the specifications and parameters of this packing type, the fluid parameters and the calculation of the column diameter, the mass transfer performance parameters and the calculation of the packing layer height, together with the manufacturing technology of the packing itself.
It is classified under CCS G91 and ICS 71.120, which places it with chemical process equipment. It is applied alongside GB 150, GB/T 3280, GB/T 4238, HG 20652-1998, HG/T 21559.3-2005, HG/T 21585.1-1998, HG/T 21618-1998 and JB 4710-2005.
It replaces HG/T 21559.1-1995. Issued on 17 October 2013, it has applied since 1 March 2014.
Found what you need?
Document preview — HG/T 21559.1-2013
National Standard of the People's Republic of China
- ICS
- 71.120
- Replacing
- HG/T 21559.1-1995
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 21559.1-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 17 October 2013 and has been in force since 1 March 2014.
It replaces the earlier edition HG/T 21559.1-1995.
It is one of 3 parts of the HG/T 21559 series.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for stainless steel punched-mesh corrugated-sheet structured packings used in mass transfer columns. It sets out the specifications and parameters of this packing type, the fluid parameters and the calculation of the column diameter, the mass transfer performance parameters and the calculation of the packing layer height, together with the manufacturing technology of the packing itself. It is classified under CCS G91 and ICS 71.120, which places it with chemical process equipment. It is applied alongside GB 150, GB/T 3280, GB/T 4238, HG 20652-1998, HG/T 21559.3-2005, HG/T 21585.1-1998, HG/T 21618-1998 and JB 4710-2005. It replaces HG/T 21559.1-1995.
HG/T 21559.1-2013 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 150
GB/T 3280
GB/T 4238
HG 20652-1998 — Specification of columns design
HG/T 21559.3-2005 — Stainless steel wire corrugated packing standard
HG/T 21585.1-1998 — Removable. Type trough. Pan gas and liquid distributor
HG/T 21618-1998 — Mesh Demister
JB 4710-2005
4 Where this standard sits
It cites 8 standards, among them HG 20652-1998, HG/T 21559.3-2005, HG/T 21585.1-1998, listed in full above.
It is one part of the HG/T 21559 series, of which this catalogue holds 3 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 36 pages
6 Related standards
Other parts of this standard:
HG/T 21559.2-2005 — Stainless steel perforated plate corrugated packing standard
HG/T 21559.3-2005 — Stainless steel wire corrugated packing standard
Other editions:
HG/T 21559.1-1995 (earlier edition)
Standards on related subjects:
GB/T 29465-2023 — Flange of floating heat exchangers
HG/T 22822-2021 — Code for design of waste gas collection and treatment in rubber plants
HG/T 21637-2021 — Strainer series for chemical industry piping
HG/T 21574-2018 — Code for design and selection of lifting lugs for chemical equipment
7 Classification and status
International classification (ICS): 71.120
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 36 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 150Pressure Vessels (Collection GB150.1~150.4-2011)
- GB/T 3280Cold rolled stainless steel plate, sheet and strip
- GB/T 4238Heat-resisting steel plate, sheet and strip
- HG 20652-1998Specification of columns design
- HG/T 21559.3-2005Stainless steel wire corrugated packing standard
- HG/T 21585.1-1998Removable. Type trough. Pan gas and liquid distributor
Similar standards
Editions of HG/T 21559.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 21559.1-2013 | Engineering technical specification for stainless steel perforated-mesh corrugated structured packings | current edition | Current |
| HG/T 21559.1-1995 | Engineering technical specification for stainless steel perforated-mesh corrugated structured packings | previous edition | Superseded |
This page sells the current edition, HG/T 21559.1-2013. Earlier editions are listed for reference only.
How to Download HG/T 21559.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 150.1-2011 — Pressure vessels—Part 1:General requirements
GB 150-1989 — Steel pressure vessell
GB 150-1998 — [Replaced by GB 150.1-2011~GB150.4-2011] Steel pressure vessels [including MODIFICATION 1]
HG/T 21559.1-2013
$560.00