Valid

HG/T 2148-2009Rubber and plastics internal mixers - Test methods (English PDF)

密闭式炼胶机炼塑机检测方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2148-2009 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 4, 2009

Implementation date

June 1, 2010

Scope

HG/T 2148-2009 is the English-translated version of 密闭式炼胶机炼塑机检测方法.

HG/T 2148-2009 is a recommended Chinese chemical industry standard setting out the measuring methods for internal mixers used with rubber and plastics. It fixes the test conditions, the measuring instruments and the methods applied when an internal mixer and its ram are checked.

It applies to the testing of machines that work rubber in batches by means of a pair of shaped rotors, whether for mixing or for mastication. The standards quoted in it are GB/T 9707-2010, GB/T 18153-2000, GB 25433-2010, HG/T 2108, HG/T 3120-1998 and HG/T 3228-2001.

It supersedes HG/T 2148-1991. Issued on 4 December 2009, it has applied since 1 June 2010.

Found what you need?

Document preview — HG/T 2148-2009

National Standard of the People's Republic of China

ICS
71.120
Replacing
HG/T 2148-1991

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 2148-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.

It replaces the earlier edition HG/T 2148-1991.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese chemical industry standard setting out the measuring methods for internal mixers used with rubber and plastics. It fixes the test conditions, the measuring instruments and the methods applied when an internal mixer and its ram are checked. It applies to the testing of machines that work rubber in batches by means of a pair of shaped rotors, whether for mixing or for mastication. The standards quoted in it are GB/T 9707-2010, GB/T 18153-2000, GB 25433-2010, HG/T 2108, HG/T 3120-1998 and HG/T 3228-2001. It supersedes HG/T 2148-1991.

HG/T 2148-2009 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 1,628 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

GB 25433-2010 — Safety requirements of rubber internal mixers and plastics internal mixers

GB/T 9707-2010 — Rubber internal mixers & plastics internal mixers

GB/T 18153-2000 — Safety of machinery. Temperatures of touchable surfaces. Ergonomics data to establish temperature limit values for hot surfaces

HG/T 2108

HG/T 3120-1998 — The general technological requirements for the appearance of the rubber and plastic machinery

HG/T 3228-2001 — General technical specifications for painting of rubber and plastics machinery

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 2148-1991 (earlier edition)

Standards on related subjects:

GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines

JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines

GB 20055-2006 — Safety requirements of mill for rubber and plastics

HG/T 2147-2011 — Rubber embossing calenders

HG/T 2146-2011 — Bladder curing presses

HG/T 2150-2009 — Rubber and plastics calenders - Test methods

6 Classification and status

International classification (ICS): 71.120

Chinese Standard Classification (CCS): G 95

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2148

EditionTitleRevisionStatus
HG/T 2148-2009Rubber and plastics internal mixers - Test methodscurrent editionCurrent
HG/T 2148-1991Rubber and plastics internal mixers - Test methodsprevious editionSuperseded

This page sells the current edition, HG/T 2148-2009. Earlier editions are listed for reference only.

How to Download HG/T 2148-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2148-2009

$105.00