Valid

GB/T 9707-2010Rubber internal mixers & plastics internal mixers (English PDF)

密闭式炼胶机炼塑机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB/T 9707-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

September 26, 2010

Implementation date

October 1, 2011

Scope

GB/T 9707-2010 is the English-translated version of 密闭式炼胶机炼塑机.

GB/T 9707-2010 is the Chinese national standard covering rubber internal mixers & plastics internal mixers. It was issued on 26 September 2010 and has been in force since 1 October 2011, replacing GB/T 9707-2000.

The document is under the responsibility of the China Petroleum and Chemical Industry Federation. This page is published from the official record of the 2010 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — GB/T 9707-2010

National Standard of the People's Republic of China

ICS
71.120
Classification
G 95
Replacing
GB/T 9707-2000

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Requirements
  • 3.1 General Requirements
  • 3.2 Allowable Working Pressure and Allowable Working Temperature of Rotary Machines
  • 3.3 Inlets, Outlets and Other Connections
  • 3.4 Materials
  • 4 Test Methods
  • 4.1 Warning
  • 4.3 Appearance
  • 4.4 Determination of ethylene oxide content
  • 5 Inspection Rules
  • 5.2 Control of pollutant source
  • 5.3 Waste gas treatment
  • 6 Marking, Packaging, Transportation and Storage
  • 6.2 Control of pollution source
  • 6.3 Storage and transportation of wastewater and reused water
  • 6.4 Treatment of wastewater and reused water
  • 6.5 Design of sewage and reused water treatment plant (station)
  • 6.6 Water pollution prevention and control under accident conditions
  • 6.7 Prevention and control of groundwater and soil pollution
  • 7 Safety
  • 7.3 Storage and transportation of solid waste
  • 7.4 Solid waste treatment and disposal
  • 8 Prevention and control of noise
  • 8.2 Noise control of machinery and equipment
  • 8.3 Noise control of factory-area
  • 8.4 Noise control of factory-boundary
  • 8.5 Noise monitoring
  • 9 Environmental monitoring

1 Foreword

GB/T 9707-2010 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 26 September 2010 and has been in force since 1 October 2011.

It replaces the earlier edition GB/T 9707-2000, GB/T 9707-1988.

The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

GB/T 9707-2010 falls under ICS 71.120, in the field of chemical technology.

This catalogue holds 2,352 other GB/T standards in that field.

In this catalogue, GB/T standards carry edition years from 1963 to 2026.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

English translation: about 15 pages

4 Related standards

Other editions:

GB/T 9707-2026 (later edition)

GB/T 9707-2000 (earlier edition)

GB/T 9707-1988 (earlier edition)

Standards on related subjects:

GB/T 45132-2025 — Tyre intelligent manufacturing - Interconnection network architecture - General specification

GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines

GB/T 32662-2016 — Complete set of pyrolysis equipment for waste rubber and waste plastic to oil

GB/T 13578-2026 — Rubber and plastics calenders

GB/T 13577-2026 — Mills for rubber and plastics

5 Classification and status

International classification (ICS): 71.120

Chinese Standard Classification (CCS): G 95

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of GB/T 9707

EditionTitleRevisionStatus
GB/T 9707-2010Rubber internal mixers & plastics internal mixerscurrent editionCurrent
GB/T 9707-2000Rubber internal mixers & plastics internal mixersprevious editionSuperseded

This page sells the current edition, GB/T 9707-2010. Earlier editions are listed for reference only.

How to Download GB/T 9707-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 9707-2010

$150.00