Valid

HG/T 2122-2020Auxiliary systems for mechanical seals of stirred vessels (English PDF)

釜用机械密封辅助装置

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2122-2020 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

April 16, 2020

Implementation date

October 1, 2020

Scope

HG/T 2122-2020 is the English-translated version of 釜用机械密封辅助装置.

HG/T 2122-2020 is the Chinese standard "Auxiliary systems for mechanical seals of stirred vessels".

Its scope clause reads: This standard specifies the types and main parameters of auxiliary devices for mechanical seals used in kettles, the principle of setting and selection of auxiliary devices, the requirements, marking and packaging of auxiliary devices.

This standard applies to the auxiliary devices (support systems) of mechanical seals for various types of kettles with mechanical stirring devices in chemical, petrochemical and other similar devices.

Found what you need?

Document preview — HG/T 2122-2020

National Standard of the People's Republic of China

ICS
71.120.10; 21.140
Replacing
HG/T 2122-2003

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • 1 Scope

1 Scope

This standard specifies the types and main parameters of auxiliary devices for mechanical seals used in kettles, the principle of setting and selection of auxiliary devices, the requirements, marking and packaging of auxiliary devices.

This standard applies to the auxiliary devices (support systems) of mechanical seals for various types of kettles with mechanical stirring devices in chemical, petrochemical and other similar devices.

Foreword

This document was issued on 16 April 2020 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 October 2020.

It replaces HG/T 2122-2003.

Classification: ICS 71.120.10; 21.140.

About this edition

HG/T 2122-2020 is the current edition. It was issued on 16 April 2020 and has been in force since 1 October 2020, replacing HG/T 2122-2003.

HG/T 2122-2003 has been superseded: a specification that still cites it is citing a withdrawn edition.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

HG/T 2122-2020 replaces HG/T 2122-2003. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

HG/T 2122-2020 is classified under ICS 71.120.10; 21.140, in the field of chemical technology. ICS is the International Classification for Standards, the same scheme used by ISO and by the national bodies of most countries, which is what allows a Chinese standard to be placed beside its foreign counterparts on subject rather than on number.

The HG/T prefix marks a recommended standard of China's chemical industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

How this standard is designated

The full designation is HG/T 2122-2020. A citation should carry the number with its year, because the year identifies the text that applies.

In a catalogue or a filing system it is found under ICS 71.120.10; 21.140 — the international classification and the Chinese one, which are the two codes by which a standard on this subject is searched.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2122

EditionTitleRevisionStatus
HG/T 2122-2020Auxiliary systems for mechanical seals of stirred vesselscurrent editionCurrent
HG/T 2122-2003Auxiliary systems for mechanical seals of stirred vesselsprevious editionSuperseded

This page sells the current edition, HG/T 2122-2020. Earlier editions are listed for reference only.

How to Download HG/T 2122-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2122-2020

$240.00