Valid

HG/T 2098-2011Mechanical seals for agitated vessels - Types, main dimensions and marking (English PDF)

釜用机械密封类型、主要尺寸及标志

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 2098-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 20, 2011

Implementation date

July 1, 2012

Scope

HG/T 2098-2011 is the English-translated version of 釜用机械密封类型、主要尺寸及标志.

HG/T 2098-2011 is a recommended Chinese chemical industry standard dealing with mechanical seals for agitated vessels. It fixes the types, the main dimensions and the marking of these seals.

They are intended for the stirring shafts of steel vessels and for similar vertical rotating shafts, with shaft or sleeve diameters between 30 mm and 220 mm, speeds no greater than 2 m/s and vessel temperatures no higher than 350 °C; media that are strongly oxidizing acids or highly concentrated alkalis fall outside the scope.

It quotes HG/T 20592-2009. It supersedes HG/T 2098-2001. Issued on 20 December 2011, it has applied since 1 July 2012.

Found what you need?

Document preview — HG/T 2098-2011

National Standard of the People's Republic of China

Replacing
HG/T 2098-2001

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 2098-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 December 2011 and has been in force since 1 July 2012.

It replaces the earlier edition HG/T 2098-2001.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese chemical industry standard dealing with mechanical seals for agitated vessels. It fixes the types, the main dimensions and the marking of these seals. They are intended for the stirring shafts of steel vessels and for similar vertical rotating shafts, with shaft or sleeve diameters between 30 mm and 220 mm, speeds no greater than 2 m/s and vessel temperatures no higher than 350 °C; media that are strongly oxidizing acids or highly concentrated alkalis fall outside the scope. It quotes HG/T 20592-2009. It supersedes HG/T 2098-2001.

HG/T 2098-2011 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,683 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 Normative references

HG/T 20592-2009 — Steel Pipe Flanges

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

HG/T 2098-2001 (earlier edition)

Standards on related subjects:

GB/T 29465-2023 — Flange of floating heat exchangers

HG/T 2044-2020 — Plasma-sprayed chromium oxide seal rings for mechanical seals - Technical specifications

HG/T 2100-2020 — Mechanical seals for liquid ring chlorine pumps

HG/T 2099-2020 — Test code for mechanical seals of stirred vessels

6 Classification and status

Chinese Standard Classification (CCS): G 91

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of HG/T 2098

EditionTitleRevisionStatus
HG/T 2098-2011Mechanical seals for agitated vessels - Types, main dimensions and markingcurrent editionCurrent
HG/T 2098-2001Mechanical seals for agitated vessels - Types, main dimensions and markingprevious editionSuperseded

This page sells the current edition, HG/T 2098-2011. Earlier editions are listed for reference only.

How to Download HG/T 2098-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 2098-2011

$165.00