HG/T 2069-2022Two-half-shaft radial force measuring instruments for rotary shaft lip seals (English PDF)
旋转轴唇形密封圈两半轴式径向力测定仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2069-2022 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 20, 2022
Implementation date
April 1, 2023
Scope
HG/T 2069-2022 is the English-translated version of 旋转轴唇形密封圈两半轴式径向力测定仪.
HG/T 2069-2022 is the Chinese standard "Two-half-shaft radial force measuring instruments for rotary shaft lip seals".
Its scope clause reads: This standard specifies the terms and definitions, structure, requirements, inspection methods, inspection rules, signs, packaging, transportation, storage and accompanying documents of the two-half-axis radial force tester for the rotary shaft lip seal ring.
This standard applies to two-half-axis radial force testers for testing rubber rotating shaft lip seals with metal skeletons. This standard does not apply to sliding pin type, multi-slider combination shaft radial force measuring instrument.
Found what you need?
Document preview — HG/T 2069-2022
National Standard of the People's Republic of China
- Replacing
- HG/T 2069-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
1 Scope
This standard specifies the terms and definitions, structure, requirements, inspection methods, inspection rules, signs, packaging, transportation, storage and accompanying documents of the two-half-axis radial force tester for the rotary shaft lip seal ring.
This standard applies to two-half-axis radial force testers for testing rubber rotating shaft lip seals with metal skeletons.
This standard does not apply to sliding pin type, multi-slider combination shaft radial force measuring instrument.
Foreword
This document was issued on 20 October 2022 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 April 2023.
It replaces HG/T 2069-1991.
About this edition
HG/T 2069-2022 is the current edition. It was issued on 20 October 2022 and has been in force since 1 April 2023, replacing HG/T 2069-1991.
HG/T 2069-1991 has been superseded: a specification that still cites it is citing a withdrawn edition.
The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.
Edition history and citation
HG/T 2069-2022 replaces HG/T 2069-1991. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.
Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.
Classification and status
HG/T 2069-2022 carries no ICS number in the official record.
The HG/T prefix marks a recommended standard of China's chemical industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
How this standard is designated
The full designation is HG/T 2069-2022. A citation should carry the number with its year, because the year identifies the text that applies.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of HG/T 2069
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2069-2022 | Two-half-shaft radial force measuring instruments for rotary shaft lip seals | current edition | Current |
| HG/T 2069-1991 | Two-half-shaft radial force measuring instruments for rotary shaft lip seals | previous edition | Superseded |
This page sells the current edition, HG/T 2069-2022. Earlier editions are listed for reference only.
How to Download HG/T 2069-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
HG/T 2069-2022
$105.00