Valid

HG/T 20637.1-2017Code for preparation of engineering design documents of instrumentation for chemical plants - Composition and preparation of instrumentation engineering design documents (English PDF)

化工装置自控专业工程设计文件的编制规范 自控专业工程设计文件的组成和编制

Preview PDF

This is a limited preview

Buy now to download the full PDF (53 pages)

Need quotation for your management?

Get a formal quotation for HG/T 20637.1-2017 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

November 7, 2017

Implementation date

April 1, 2018

Scope

HG/T 20637.1-2017 is the English-translated version of 化工装置自控专业工程设计文件的编制规范 自控专业工程设计文件的组成和编制.

HG/T 20637.1-2017 opens the recommended Chinese chemical industry code on the preparation of engineering design documents for instrumentation in chemical plants.

Part one sets out what those instrumentation engineering design documents are made up of and how they are to be prepared, so it is the general part on which the rest of the series rests.

It is classified as P94 in the Chinese scheme and under 25.040.40 and 71.010 internationally. It quotes HG/T 20573, the companion parts HG/T 20637.2 to HG/T 20637.8, HG/T 20638, HG/T 20639.2 and GB 50493.

It takes the place of HG/T 20637.1-1998. Issued on 7 November 2017, it has applied since 1 April 2018.

Found what you need?

Document preview — HG/T 20637.1-2017

National Standard of the People's Republic of China

ICS
25.040.40
Replacing
HG/T 20637.1-1998

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 3 Terms and definitions
  • 4 Molecular formula and relative molecular mass
  • 5 Classification
  • 6 Test methods
  • 6.1 General provisions
  • 6.2 Appearance inspection
  • 7 Inspection Rules
  • 9 Marking and accompanying documents

1 Foreword

HG/T 20637.1-2017 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 7 November 2017 and has been in force since 1 April 2018.

It replaces the earlier edition HG/T 20637.1-1998.

It is one of 15 parts of the HG/T 20637 series.

2 Scope Preview

HG/T 20637.1-2017 opens the recommended Chinese chemical industry code on the preparation of engineering design documents for instrumentation in chemical plants. Part one sets out what those instrumentation engineering design documents are made up of and how they are to be prepared, so it is the general part on which the rest of the series rests. It is classified as P94 in the Chinese scheme and under 25.040.40 and 71.010 internationally. It quotes HG/T 20573, the companion parts HG/T 20637.2 to HG/T 20637.8, HG/T 20638, HG/T 20639.2 and GB 50493. It takes the place of HG/T 20637.1-1998.

HG/T 20637.1-2017 falls under ICS 25.040.40, in the field of manufacturing engineering.

This catalogue holds 8 other HG/T standards in that field.

In this catalogue, HG/T standards carry edition years from 1975 to 2026.

3 Normative references

HG/T 20573

HG/T 20637.2

HG/T 20637.3

HG/T 20637.4

HG/T 20637.5

HG/T 20637.6

HG/T 20637.8

HG/T 20638

HG/T 20639.2

HG/T 20637.7

GB 50493

4 Where this standard sits

It cites 11 standards, listed in full above.

It is one part of the HG/T 20637 series, of which this catalogue holds 15 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 53 pages

6 Related standards

Other parts of this standard:

HG/T 20637.2-1998 — Symbols and identifiers for engineering design of instrumentation

HG/T 20637.2-2017 — Graphic symbols and letter codes for instrumentation engineering design

HG/T 20637.3-1998 — Preparation of instrumentation engineering specification

HG/T 20637.3-2017 — Preparation of instrumentation design regulations

HG/T 20637.4-1998 — Preparation of requirements for instrumentation construction and erection

HG/T 20637.4-2017 — Preparation of instrumentation design descriptions

HG/T 20637.5-1998 — Preparation of instrumentation requisition

HG/T 20637.5-2017 — Preparation of instrument requisitions

HG/T 20637.6-1998 — Preparation of instrumentation specification

HG/T 20637.6-2017 — Preparation of instrument specifications

HG/T 20637.7-1998 — Materials take-off of instrumentation

HG/T 20637.7-2017 — Material take-off for instrument installation

HG/T 20637.8-1998 — Numbering of Auxiliary Equipment, Cables and Tubes

HG/T 20637.8-2017 — Numbering of instrument auxiliary equipment and cables

Other editions:

HG/T 20637.1-1998 (earlier edition)

Standards on related subjects:

GB 50683-2011 — Code for Acceptance of Field Equipment, Industrial Pipe Welding Construction Quality

GB 50236-2011 — Code for construction of field equipment, industrial pipe welding engineering

GB 50316-2000 — Design code for industrial metallic piping [2008 revision]

7 Classification and status

International classification (ICS): 25.040.40

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 53 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

Editions of HG/T 20637.1

EditionTitleRevisionStatus
HG/T 20637.1-2017Code for preparation of engineering design documents of instrumentation for chemical plants - Composition and preparation of instrumentation engineering design documentscurrent editionCurrent
HG/T 20637.1-1998Code for preparation of engineering design documents of instrumentation for chemical plants - Composition and preparation of instrumentation engineering design documentsprevious editionSuperseded

This page sells the current edition, HG/T 20637.1-2017. Earlier editions are listed for reference only.

How to Download HG/T 20637.1-2017

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
53 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 20637.1-2017

$860.00