HG/T 20222-2017Technical specification for welding of aluminium and aluminium alloys (English PDF)

1 Scope

This standard specifies the technical requirements for materials, welding construction and welding inspection involved in the welding construction of aluminum and aluminum alloys in the chemical construction process.

Foreword

This document was issued on 7 July 2017 by the Ministry of Industry and Information Technology of the People's Republic of China, and has been in force since 1 January 2018.

It replaces HGJ 222-1992.

The document is under the responsibility of the Ministry of Industry and Information Technology.

About this edition

HG/T 20222-2017 is the current edition. It was issued on 7 July 2017 and has been in force since 1 January 2018, replacing HGJ 222-1992.

HGJ 222-1992 has been superseded: a specification that still cites it is citing a withdrawn edition.

The interval between issue and effect is the transition period. It exists so that producers, laboratories and buyers can requalify products, revise procedures and use up documentation before the new text becomes the one that applies. The date on this page is the official one announced by the Ministry of Industry and Information Technology of the People's Republic of China.

Edition history and citation

HG/T 20222-2017 replaces HGJ 222-1992. A specification, drawing or test report that cites the older number is pointing at a document that is no longer the one in force, and the two editions can differ in requirements, in test methods or in scope.

Where an edition is replaced, the Chinese standardization system keeps the number and changes the year: the number identifies the subject, the year identifies the text. That is why a citation without a year is ambiguous and a citation with one is not.

Classification and status

HG/T 20222-2017 carries no ICS number in the official record.

The HG/T prefix marks a recommended standard of China's chemical industry, issued by the Ministry of Industry and Information Technology. It is not, in itself, law: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document is under the responsibility of the Ministry of Industry and Information Technology, which is the body that maintains it and that will answer a formal question about its interpretation.

How this standard is designated

The full designation is HG/T 20222-2017. A citation should carry the number with its year, because the year identifies the text that applies.