HG/T 20206-2017Code for construction and acceptance of chemical machinery installation engineering (Small and medium-sized reciprocating compressors) (English PDF)
化工机器安装工程施工及验收规范(中小型活塞式压缩机)
This is a limited preview
Buy now to download the full PDF (54 pages)
Need quotation for your management?
Get a formal quotation for HG/T 20206-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 12, 2017
Implementation date
October 1, 2017
Scope
HG/T 20206-2017 is the English-translated version of 化工机器安装工程施工及验收规范(中小型活塞式压缩机).
HG/T 20206-2017 is the Chinese standard "Code for construction and acceptance of chemical machinery installation engineering (Small and medium-sized reciprocating compressors)".
Its scope clause reads: This code is formulated in order to improve the installation of medium and miniature sized piston compressor sets, strengthen the quality control in the compressor installation process, and ensure the quality of installation.
This code applies to the construction and acceptance of on-site assembly or integrated installation of medium and miniature sized piston compressor sets in the chemical and petrochemical industries.
The general technical requirements for installation engineering construction and acceptance of medium and miniature sized piston compressor sets shall comply with the relevant provisions of the current industry standard HG 20203 Code for construction and acceptance of chemical machine installation engineering (General purpose requirement).
Where this code is inconsistent with the requirements of the accompanied technical documents of the compressor sets, the latter shall prevail. Its clauses include general provisions; terms; construction preparation.
Found what you need?
Document preview — HG/T 20206-2017
National Standard of the People's Republic of China
- Replacing
- HGJ 206-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 334 HG/T 20201—2017 Code for lifting of chemical engineering construction HG 20201—2000 10/01/2
- Foreword
- 1 General provisions
- 2 Terms
- 2.0.
- 3 Construction preparation
- 3.1 Technical preparation
- 3.1.1 The set shall have the following technical documents before installation:
- 1 End-of-manufacturing certificate.
1 General provisions
1.0.1
This code is formulated in order to improve the installation of medium and miniature sized piston compressor sets, strengthen the quality control in the compressor installation process, and ensure the quality of installation.
1.0.2
This code applies to the construction and acceptance of on-site assembly or integrated installation of medium and miniature sized piston compressor sets in the chemical and petrochemical industries.
1.0.3
The general technical requirements for installation engineering construction and acceptance of medium and miniature sized piston compressor sets shall comply with the relevant provisions of the current industry standard HG 20203 Code for construction and acceptance of chemical machine installation engineering (General purpose requirement).
1.0.4
Where this code is inconsistent with the requirements of the accompanied technical documents of the compressor sets, the latter shall prevail.
1.0.5
The construction and acceptance of the installation of medium and miniature sized piston compressor sets shall not only comply with this code, but also comply with the relevant current national standards.
2 Terms
2.0.1 piston compressor
a machine that works through the piston or plunger making a reciprocating linear motion to periodically change the working volume formed within the cylinder for the purpose of increasing the gas pressure and transporting the gas
2.0.2 throw
the sign of the centerlines of the compressor cylinder, the number of throw is the number of the centerlines of the cylinder
2.0.3 stage
the sign indicating that the compressed gas has been compressed to the predetermined amount of pressure boost
2.0.4 horizontal compressor
a compressor whose cylinder centerlines are all on the same horizontal plane
2.0.5 vertical compressor
a compressor whose cylinder centerlines are all on the same vertical plane
2.0.6 oil free compressor
a compressor that does not use lubricating oil between the friction surface of the cylinder and the reciprocating parts
2.0.7 test run
test operation of the processing equipment, machines or the entire processing system after installation
2.0.8 unload test run
test operation of the set under load-free conditions after installation
2.0.9 onload test run
test operation of the processing equipment, machines or entire processing systems under loaded conditions
3 Construction preparation
3.1 Technical preparation
3.1.1
The set shall have the following technical documents before installation:
1 End-of-manufacturing certificate.
2 The quality inspection certificate, which shall include the following contents:
1) Product quality certificates for accompanied pipes, valves, pipe fittings and fasteners;
2) Product quality certificate and manufacturing inspection certificate of pressure vessels;
3) Hydraulic test records of cylinder jacket and packing box;
4) Records of pre-assembly and trial operation of the compressor before leaving the factory.
3 The assembly drawing, process flow chart, auxiliary equipment installation drawing, wearing parts processing drawing and the product instruction manual of the set.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 54 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 50204Code for quality acceptance of concrete structure construction
- GB 50235Code for construction of industrial metallic piping engineering
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- HG 20201Specification for hoisting work of installation project of engineering construction
- HG 20203General Specification for Construction and Acceptance of Chemical
Similar standards
Editions of HG/T 20206
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 20206-2017 | Code for construction and acceptance of chemical machinery installation engineering (Small and medium-sized reciprocating compressors) | current edition | Current |
| HGJ 206-1992 | Code for construction and acceptance of chemical machinery installation engineering (Small and medium-sized reciprocating compressors) | previous edition | Superseded |
This page sells the current edition, HG/T 20206-2017. Earlier editions are listed for reference only.
How to Download HG/T 20206-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 50204-2002 — Code for acceptance of constructional quality of concrete structures (GB 50204-2002(2011))
GB 50204-2015 — Code for quality acceptance of concrete structure construction
GB 50235-1997 — Code for construction and acceptance of industrial metallic piping
HG/T 20206-2017
$860.00