GH/T 1085-2012Technical specification for cotton bale storage yard of cotton processing enterprise (English PDF)
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for GH/T 1085-2012 in 30 minutes.
Issued by
All-China Federation of Supply and Marketing Cooperatives
Level / Type
National · Recommended
Issue date
December 10, 2012
Implementation date
March 15, 2013
Scope
GH/T 1085-2012 (Technical specification for cotton bale storage yard of cotton processing enterprise) is available as an English-translated PDF.
GH/T 1085-2012 — This standard specifies the setting, stacking, power management, fire protection facilities, management and personnel of cotton processing enterprises in cotton processing enterprises.
This standard applies to the management of cotton processing enterprises in cotton processing enterprises.
Found what you need?
Document preview — GH/T 1085-2012
National Standard of the People's Republic of China
- ICS
- 65.040.20
- Classification
- B 93
Issued by: All-China Federation of Supply and Marketing Cooperatives
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Yard setting
- 3.1 General requirements
- 3.2 Open storage setting requirements
- 3.3 Semi-open-air yard setting requirements
- 3.4 Treasury setup requirements
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the All-China Federation of Supply and Marketing Cooperatives.
This standard is under the jurisdiction of the National Cotton Processing Standardization Technical Committee (SAC/TC407).
This standard was drafted. Beijing Zhongmian Machinery Complete Equipment Co., Ltd., China National Supply and Marketing Cooperatives Beijing Institute of Commercial Machinery, China Reserve Cotton Management Corporation, China Cotton Industry Co., Ltd., China National Supply and Marketing Cooperatives Zhengzhou Cotton and Maize Engineering Technology Design Research Institute, China Cotton Association Cotton Processing Branch, Beijing Zhongmian Engineering Technology Co., Ltd.
1 Scope
This standard specifies the setting, stacking, power management, fire protection facilities, management and personnel of cotton processing enterprises in cotton processing enterprises.
This standard applies to the management of cotton processing enterprises in cotton processing enterprises.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 18353-2008 Basic technical conditions for cotton processing enterprises GB 50016 Building Design Fire Code
3 Yard setting
3.1 General requirements
3.1.1 The cotton bale yard is divided into three types. open storage yard, semi-open storage yard and warehouse.
3.1.2 The area around the bale yard should be kept clean and no flammable materials should be stacked.
3.1.3 The sewers of cotton bales should be kept open.
3.1.4 The cotton bale yard should be separated from the office area, living area and production area.
3.1.5 The cotton bale yard should be separated from the battery car charging room, motor vehicle library and oil depot.
3.2 Open storage setting requirements
3.2.1 It should be set in the upwind direction of the main wind direction during the processing season in the factory.
3.2.2 The area of each jacket shall not exceed 100m2.
3.2.3 No other houses should be built in the open storage yard.
3.2.4 The safety distance between cotton aphid and other yards, buildings, chimneys and open fires shall comply with the provisions of GB 50016.
3.3 Semi-open-air yard setting requirements
3.3.1 Semi-open storage yards shall be provided with roofs.
3.3.2 It should be set in the upwind direction of the main wind direction during the processing season in the factory.
3.3.3 Buildings of primary and secondary fire rating should be used.
Note. When the load-bearing members such as the roof are non-combustion, this is not limited.
3.3.4 Fire protection zone area up to or exceeding 1000m2, should be equipped with automatic fire alarm system and automatic sprinkler system, each fire zone the area should not be greater than.2000m2.
3.4 Treasury setup requirements
3.4.1 Buildings of primary and secondary fire rating should be used.
Note. When the roof load-bearing member and the external wall are both non-combustible, this is not limited.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
Referenced standards
How to Download GH/T 1085-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 50016-2014 — Code for Fire Protection Design of Buildings (2018 Edition)
GB 50016-2018 — [2018 Edition of GB 50016-2014] Code for Fire Protection Design of Buildings [Code of Design on Building Fire Protection and Prevention]
GH/T 1316-2026 — Determination of 10 oligosaccharides in honey, honey product and honey water - HPLC method
Secure payment via Stripe
Payments accepted
GH/T 1085-2012
$105.00