GB/Z 7584.5-2026Acoustics - Hearing protectors - Part 5: Method for estimation of noise reduction using fitting by inexperienced test subjects (English PDF)
声学 护听器 第5部分:通过无经验的被试佩戴评价噪声衰减的方法
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/Z 7584.5-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
February 27, 2026
Implementation date
February 27, 2026
Scope
GB/Z 7584.5-2026 is the English-translated version of 声学 护听器 第5部分:通过无经验的被试佩戴评价噪声衰减的方法.
GB/Z 7584.5-2026 is a Chinese guidance document, identical to ISO/TS 4869-5:2006, giving a method to estimate the noise reduction of passive hearing protectors when they are fitted by inexperienced test subjects.
Sound attenuation is found as the difference between hearing thresholds with the ears open and occluded, but, unlike GB/T 7584.1, subjects fit the protector themselves after brief instruction, so results reflect the whole system of device, wearer, fitting and instruction as found among occupational users.
The text specifies test signals, test room, equipment, subject selection and number, product samples, test procedure, calculation of individual and group attenuation, uncertainty and the report.
Level-dependent protectors are excluded, and values below 500 Hz may be slightly overestimated. It was issued on 27 February 2026.
Found what you need?
Document preview — GB/Z 7584.5-2026
National Standard of the People's Republic of China
- ICS
- 17.140
- Classification
- A 59
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Measurement of sound attenuation in hearing protectors
- 4.1 Test Signal
- 4.2 Test Site
- 4.3 Test Equipment
- 5 subjects
- 5.1 Subject selection criteria
- 5.2 Number of participants
- 5.3 Otoscopic examination
- 5.4 Eyeglasses and Accessories
- 5.5 Maximum number of tests per subject
- 5.6 Exceptions
- 6 Product samples
- 6.1 General Requirements
- 6.2 Custom Earbuds
- 6.3 Special requirements for product descriptions
- 6.4 Variable Position Headband
- 6.5 Variable fixing force
- 7.Test Procedure
- 7.1 Number of open-ear and occluded-ear threshold tests
- 7.2 Information provided to the subjects
- 7.3 Before entering the testing room
- 7.4 Test Chamber Interior
- 8 Calculation of sound attenuation
- 8.1 General Rules
- 8.2 Individual Sound Attenuation Calculation
- 8.3 Calculation of Group Sound Attenuation
- 8.4 Uncertainty of sound attenuation data
- 9 Report
- Appendix A (Informative) Uncertainty of Hearing Attenuation in Hearing Protectors
- A.1 Overview
- A.2 Model
- A.3 Uncertainty Components
- A.4 Expanded Uncertainty
Foreword
This document is a standard or guiding technical document.
This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents". Drafting.
This document is Part 5 of GB/T (Z)7584 "Acoustic Hearing Protectors". GB/T (Z)7584 has already published the following parts.
---Part 1: Subjective Methods for Sound Attenuation Measurement;
---Part 2: Effective A-weighted sound pressure level estimation when wearing hearing protection;
---Part 3: Measurement of Insertion Loss of Over-Ear Hearing Protectors Using Dedicated Acoustic Testing Equipment;
---Part 5: Methods for evaluating noise attenuation by inexperienced subjects wearing the device;
---Part 6: Measurement method for active noise attenuation of hearing protectors.
This document is equivalent to ISO /T S4869-5.2006 "Acoustic hearing protectors - Part 5: Evaluation of noise levels by inexperienced test subjects".
The document type of "Methods for Sound Attenuation" has been changed from an ISO technical specification to a national standardization guidance technical document in my country.
The following minimal editorial changes have been made to this document.
---To align with Part 1 of this series of standards, section 6.1 adds "Note. The documents for other parts of this series of standards have been changed to at least four." This document also uses at least four samples for testing.
Introduction
Hearing protectors are typically used to reduce noise exposure to the ears. Based on their construction, hearing protectors can be classified into earplugs, earmuffs, and helmets, among others.
According to their working method, hearing protectors can be divided into passive noise cancellation (also known as passive noise cancellation) and active noise cancellation (also known as active noise cancellation).
GB/T (Z)7584 "Acoustic Hearing Protectors" aims to specify a standardized method for measuring the sound attenuation of hearing protectors, so as to compare similar conditions in different situations.
The product performance data obtained under the specified conditions are compared. GB/T (Z)7584 is proposed to consist of six parts.
---Part 1: Subjective Methods for Measuring Sound Attenuation. The aim is to specify the methods for measuring the sound attenuation of hearing aids at the hearing threshold under laboratory conditions. The subjective method of reduction.
---Part 2: Effective A-weighted sound pressure level estimation while wearing hearing aids. The aim is to provide several estimation methods based on Part 1.
The sound attenuation test results are used to assess the equivalent exposure sound pressure level experienced when wearing hearing protectors.
---Part 3: Measurement of Insertion Loss of Over-Ear Hearing Protectors Using Dedicated Acoustic Testing Equipment. The purpose is to conduct specialized acoustic testing... The equipment is standardized so that product performance consistency can be investigated during product type approval testing or certification procedures.
---Part 4: Measurement of the effective sound pressure level of the acoustic restoration earmuffs in relation to sound level. The purpose is to specify the acoustics used in Part 3.
A physical testing method for determining the sound level-dependent sound restoration earmuff attenuation using a testing device or head and torso simulator.
---Part 5: Methods for evaluating noise attenuation through inexperienced participants wearing the device. The aim is to provide an assessment of noise attenuation in occupational environments.
Methods for measuring the sound attenuation performance of a body system (including hearing protectors, subjects, wearers, and instructors).
---Part 6: Measurement of Sound Attenuation in Active Noise-Canceling Over-Ear Hearing Protectors. The aim is to provide information on the active insertion loss of active noise-canceling over-ear hearing protectors. Loss testing methods and total sound attenuation calculation methods.
Based on inexperienced hearing protector users, the measurement conditions given in this document can provide a representative sample of a typical user group in a real-world professional environment.
Representative sound attenuation results are available. The method described in GB/T 7584.1 can be used to obtain the sound attenuation of the tested hearing aid, and the measurement results are representative of the hearing aid's sound attenuation.
The purely physical characteristics of the device. The methods described in this document have results that cover the performance of the entire system (i.e., the hearing protector, the subject, the wearing, and the instruction).
1 Scope
This document describes a method for measuring the sound attenuation of passive hearing protectors at the hearing threshold. This method provides data for typical user groups in occupational environments.
Based on the estimated sound attenuation, these users may lack the training and motivation to wear hearing protectors in the best way.
The principle of this testing method is to measure the difference in hearing thresholds when wearing hearing protectors and not wearing them. The difference in hearing thresholds is the sound attenuation. For the given... A fixed number of subjects need to be measured twice.
Note 1.GB/T 7584.1 and this document use the measurement principle of the effect of hearing protection on hearing threshold. GB/T 7584.1 specifies the measurement of sound attenuation of hearing protection devices.
This refers to the purely physical characteristics of the hearing protector. The method described in this document assesses the overall performance of the system, taking into account the hearing protector, the subject, and the fitting method. And the impact of usage guidelines.
The data generated by this testing method was collected at low sound pressure levels (close to the hearing threshold), but these data also represent the hearing protector's performance at higher sound pressure levels.
Sound attenuation at certain levels. This document does not apply to hearing protectors where sound attenuation is related to sound pressure level; that is, beyond a certain sound pressure level, the performance of the hearing protector is affected by the sound pressure level. Influence.
Note 2. At frequencies below 500Hz, the human ear attenuation data measured in this document will be overestimated by a few decibels, and the error increases as the frequency decreases. This error is caused by... The test was conducted during which physiological noise masked the hearing threshold of the blocked ear.
2 Normative references
The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.
For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies. This document.
GB/T 3241.1-2025 Electroacoustic octave and fractional octave filters - Part 1: Specifications (IEC 61260-1:2014) IDT)
Note: There are no technical differences between the content referenced in GB/T 3241.1-2025 and the content referenced in IEC 61260:1995.
Note: GB/T 3769-2010 Electroacoustics - Scale and dimensions for plotting frequency response diagrams and polar graphs (IEC 60263:1982, IDT)
IEC 60645-1 Electroacoustic audiometry equipment - Part 1: Pure-tone audiometers
Note: GB/T 7341.1-2010 Electroacoustic audiometry equipment - Part 1: Pure tone audiometers (IEC 60645-1:2001, IDT)
IEC 61672-1 Electroacoustics - Sound level meters - Part 1: Specification Specifications)
Note: GB/T 3785.1-2023 Electroacoustic sound level meters - Part 1: Specifications (IEC 61672-1:2013, IDT) 1993]
3 Terms and Definitions
The following terms and definitions apply to this document.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
IEC 60645-1 · IEC 61672-1
Similar standards
How to Download GB/Z 7584.5-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3241.1-2025 — Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
GB/Z 102.17-2026 — Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation
GB/Z 103-2026 — Health informatics - The architecture of internet healthcare service network
GB/Z 7584.5-2026
$360.00