GB/Z 45064-2024Equipment for general lighting purposes - Stroboscopic effects - Objective test method (English PDF)
普通照明用设备 频闪效应 客观试验方法
This is a limited preview
Buy now to download the full PDF (28 pages)
Need quotation for your management?
Get a formal quotation for GB/Z 45064-2024 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2024
Implementation date
December 31, 2024
Scope
GB/Z 45064-2024 is the English-translated version of 普通照明用设备 频闪效应 客观试验方法.
GB/Z 45064-2024 sets out an objective way to test how visible the stroboscopic effect of general lighting equipment is, and it is a modified adoption of IEC TR 63158:2018.
The method rests on a stroboscopic visibility meter (SVM), and the document describes the laboratory and equipment, the meter itself, test setup and operating conditions, general test steps, application-based conditions, the test report and measurement uncertainty.
Its evaluation targets typical indoor light levels above 100 lx and moderate motion below 4 m/s, and it can be used for lighting supplied from AC or DC mains, batteries or external dimmers.
It gives no limits and ignores changes of light colour over time. It was issued on 31 December 2024.
Found what you need?
Document preview — GB/Z 45064-2024
National Standard of the People's Republic of China
- ICS
- 29.140.01
- Classification
- K 70
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Symbols and abbreviations
- 5 General
- 6 Laboratories and Equipment
- 7 Stroboscopic Visibility Meter
- 8 Test Setup and Operating Conditions
- 9 General test steps
- 10 Application-based equipment, steps and conditions
- 11 Test Report
- 12 Measurement uncertainty
- Appendix A (Informative) Technical differences between this document and IEC TR63158:2018 and their causes
- Appendix B (Normative) Description of the stroboscopic effect visibility meter
- Appendix C (Informative) Test Result Example
- Appendix D (Informative) Uncertainty Considerations Reference
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.
This document is modified to adopt IEC TR63158:2018 "Objective test method for stroboscopic effects of lighting equipment for general lighting purposes".
This document has made the following structural adjustments compared to IEC TR63158:2018.
---Set up a separate chapter for symbols and abbreviations, and the subsequent chapter numbers will be postponed accordingly.
---Interchange the order of Annex B and Annex C of IEC TR63158:2018, and modify the appendix numbers in the text accordingly (see Annex C, Appendix D, Appendix B and Appendix C of IEC TR63158:2018). Compared with IEC TR63158:2018, this document has many technical differences.
A list of these technical differences and their reasons is given in Appendix A. The following editorial changes were made to this document.
--- Change the name of the standard to "Objective test method for stroboscopic effects of general lighting equipment";
--- The abbreviation TLD was deleted (see 3.3 of IEC TR63158:2018);
--- Added informative Appendix A.
1 Scope
This document describes an objective Stroboscopic Visibility Meter (SVM) that can be applied to the performance of lighting equipment under different operating conditions. test.
The stroboscopic effects considered in this document are limited to conditions with typical indoor light levels ( >100lx) and with the observer or nearby processing objects.
Objective evaluation of the visible stroboscopic effects of transient light modulation of lighting devices by human observers in ordinary indoor applications with moderate motion (< 4 m/s)
For the applicability limitations of the parameters for evaluating the visibility of stroboscopic effects, see Appendix B, B.1.
Evaluation of undesirable stroboscopic effects in other applications, such as false perception of fast rotation or mechanical movement in industrial environments, requires Other indicators and methods.
This document is intended to establish an objective basis for evaluating the performance of lighting equipment with respect to stroboscopic effects. This document does not take into account the variation of light color over time.
This document describes the SVM method but does not specify any limits.
The objective methods and procedures described in this document are based on the content of CIETN006.2016 on transient light artifacts (TLAs).
The method described in this document is applicable to objectively evaluate the power supply from any power source, such as AC power supply, DC power supply, battery or via external dimmer. Type of lighting equipment with stroboscopic effect.
2 Normative references
This document has no normative references.
3 Terms and definitions
The following terms and definitions apply to this document.
3.1 Auxiliary equipment
A peripheral device that is part of the system under test.
3.2 Equipment-under-test
Equipment subject to flicker visibility testing.
3.3 Temporal light artefact
Changes in the visual perception of a human observer in a specific environment in response to a light stimulus whose brightness or spectral distribution varies over time.
Note: The change in visual perception is caused by the contrast between the visual perception of the same person in the same environment under modulated light and the visual perception under non-modulated light. result. [Source: CIETN006.2016,2.4.1]
3.4 Flicker
The perception of visual instability caused by a static observer in a static environment to a light stimulus whose brightness or spectral distribution changes over time.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 28 pages — is available in the English PDF.
Similar standards
How to Download GB/Z 45064-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/Z 102.17-2026 — Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation
GB/Z 103-2026 — Health informatics - The architecture of internet healthcare service network
GB/Z 108-2026 — Health informatics - Internet healthcare service pattern
GB/Z 45064-2024
$495.00