Valid

GB/Z 44472-2024Explanation of the mathematical addition of working voltages, insulation between circuits and use of PELV in lighting standards (English PDF)

照明标准中工作电压数学加法、电路间绝缘和PELV使用的说明

Preview PDF

This is a limited preview

Buy now to download the full PDF (17 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 44472-2024 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

October 26, 2024

Implementation date

October 26, 2024

Scope

GB/Z 44472-2024 is the English-translated version of 照明标准中工作电压数学加法、电路间绝缘和PELV使用的说明.

GB/Z 44472-2024 is a Chinese guidance document, modified from IEC TR 63139:2018, that explains the insulation coordination rules brought into lighting standards to cover LED light sources and controllable products.

It shows how supply and working voltages are added mathematically under a first fault in order to assess creepage distances and clearances, and it discusses insulation between circuits with a circuit analysis.

The use of protective extra-low voltage (PELV) with LEDs and the insulation between low-voltage power and control line conductors are also covered. The document explains the fault conditions behind Annex X of GB/T 7000.1-2023 and Clause 15 of GB/T 19510.1-2023. It was issued on 26 October 2024.

Found what you need?

Document preview — GB/Z 44472-2024

National Standard of the People's Republic of China

ICS
29.140.01
Classification
K 70

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 Mathematical addition of operating voltage
  • 5 Insulation between circuits
  • 6 Circuit Analysis
  • 7 Use of PELV
  • 8 Insulation between LV power and control line conductors

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

This document is modified to adopt IEC TR63139:2018 "On the mathematical addition of working voltages, insulation between circuits and PELV in TC34 standards Instructions for use". The document type has been adjusted from IEC technical report to my country's national standardization guidance technical document. The following editorial changes have been made to this document.

--- In order to coordinate with my country's standard system, the name of the standard was changed to "Mathematical addition of working voltage, insulation between circuits and lighting standards Instructions for use of PELV;

---Change "TC34" to "Lighting" (see Chapter 1 and Chapter 4);

--- Added LV, ELV letter explanation (see Chapter 1);

--- Add voltage symbol description in Table 1 (see Table 1);

--- Replaced IEC 60598-1:2014 with the informative reference GB/T 7000.1-2023;

--- Replaced IEC 61347-1:2015 with the informative reference GB/T 19510.1-2023 (see Chapter 1, Chapter 4, Chapter 5);

--- Replaced IEC 60634-4-41 with the informative reference GB/T 16895.21 (see 7.1, 7.2, 7.3);

--- Replaced IEC 60449 with the informative reference GB/T 18379 (see 7.2);

--- Replaced IEC 61558-1 with the informative reference GB/T 19212.1 (see 7.1).

1 Scope

This document explains the insulation coordination requirements introduced in lighting standards to cover new technologies related to LED light sources and controllable products.

Instructions, including mathematical addition of working voltages, insulation between circuits, use of protective extra low voltage (PELV), and low voltage (LV) power supplies and controls Description of the insulation between line conductors.

This document describes how the supply voltage and the operating voltage are superimposed when the first fault occurs in order to assess the electrical insulation requirements of the system. (e.g. creepage distances and clearances).

In addition, this document also explains in detail the Appendix X of GB/T 7000.1-2023 and Chapter 15 of GB/T 19510.1-2023.

The actual failure conditions are given, and the rationale for the protection requirements for each condition is given [e.g. possible LV primary circuit to extra-low voltage (ELV) Failure of the secondary circuit will not lead to insulation overload of the secondary circuit].

This document also describes the possibilities of improving the interference immunity and reliability of electronic circuits when using PELV together with LEDs and the system Related safety consequences.

Insulation between LV power and control line conductors is equally important and this document explains why it is fundamental to a complete installation. Safety considerations.

2 Normative references

This document has no normative references.

3 Terms and Definitions

There are no terms or definitions that require definition in this document.

4 Mathematical addition of operating voltages

The insulation requirements between live parts and accessible conductive parts are determined by the control equipment input/output insulation classification, the insulation of lamps, etc.

For grades, see Table X.1 of GB/T 7000.1-2023 and Table 6 of GB/T 19510.1-2023.

Insulation requirements in lighting standards are based on risk assessments assuming specific fault conditions occur.

Insulation requirements are generally based on the operating voltage Uout, but in certain specific fault conditions, when the power supply and output terminals of the control device are When the basic insulation between the primary circuit (Usupply) and the secondary circuit (Uout) fails, the power supply voltage is increased to Uout.

Control devices with heavy insulation and reinforced insulation are not subject to this type of failure.

If basic insulation fails within the control gear, the following assumptions are made.

---Output voltage increased;

---The lamp continues to operate and the increased voltage exists long enough to create a conductive path across the insulation (called leakage current). electrical tracking).

For the 50Hz/60Hz transformer in the control unit, this fault condition will cause a voltage increase, which can be In electronic control devices, the complexity of the oscillation circuit may affect the result, which may be the case.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 17 pages — is available in the English PDF.

Similar standards

How to Download GB/Z 44472-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
17 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 44472-2024

$300.00