Valid

GB/Z 43996.3-2026Fine bubble technology - Agricultural applications - Part 3: Guidelines for the minimum viable number concentration of ultrafine bubbles for promoting the germination of barley seeds (English PDF)

微细气泡技术 农业应用 第3部分:促进大麦种子发芽的超细气泡最低数量浓度指南

Preview PDF

This is a limited preview

Buy now to download the full PDF (24 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 43996.3-2026 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 28, 2026

Implementation date

January 28, 2026

Scope

GB/Z 43996.3-2026 is the English-translated version of 微细气泡技术 农业应用 第3部分:促进大麦种子发芽的超细气泡最低数量浓度指南.

GB/Z 43996.3-2026 is a Chinese guidance document, modified from ISO/TR 23016-3:2021, on the minimum number concentration of ultrafine bubbles needed to promote the germination of barley seeds.

Building on the germination test of GB/Z 43996.2-2024, it uses the time to reach half the maximum germination rate (T50) to judge whether ultrafine bubble water at different concentrations speeds germination.

It describes the test system, the criterion for significant differences in T50, seeds and particle size and concentration measuring devices, and presents measurement data on seeds stored for different periods after dormancy breaking, followed by recommendations.

An annex gives example particle size distribution data. It helps users choose a suitable ultrafine bubble generation system. It was issued on 28 January 2026.

Found what you need?

Document preview — GB/Z 43996.3-2026

National Standard of the People's Republic of China

ICS
65.020.20; 07.030
Classification
A 20

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 Test Object System
  • 5 Determination of significant differences in T50
  • 6 Seeds and measuring devices
  • 6.1 Seeds used for germination test
  • 6.2 Device for Measuring Ultrafine Bubble Particle Size and Concentration
  • 6.3 Concentration range of ultrafine bubble water
  • 7 Measurement Data
  • 7.1 The necessary storage period for barley seeds is longer than the dormancy-breaking period
  • 7.2 Effects of various concentrations of ultrafine bubbles on germination promotion of seeds at different storage periods
  • 7.3 Data Analysis Results
  • 8 Recommendations
  • References

Foreword

This document is a report-type guidance technical document.

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents". Drafting.

This document is Part 3 of GB /Z 43996 "Agricultural Applications of Microbubble Technology". GB /Z 43996 has already published the following parts.

---Part 1: Test methods for evaluating the growth-promoting effect of hydroponically grown lettuce;

---Part 2: Test methods for evaluating the germination-promoting effect of barley seeds;

---Part 3: Guidelines on the minimum concentration of ultrafine bubbles to promote barley seed germination.

This document is modified to adopt ISO /T R23016-3.2021 "Microbubble technology in agriculture - Part 3: Promoting barley seed germination".

The document type of the "Guideline on Minimum Quantity Concentration of Ultrafine Bubbles" has been changed from an ISO technical report to a national standardization guidance document in my country. document.

The technical differences between this document and ISO /T R23016-3.2021, and the reasons therefor, are as follows.

---ISO 20480-1 and ISO 20480-2 have been replaced by the normatively referenced GB/T 41914.1 and GB/T 41914.2 (see section 3). Chapter), to adapt to my country's national conditions;

---GB /Z 43996.2-2024 has replaced the normatively referenced ISO 23016-2 to adapt to my country's technical conditions and improve operability. Sexual activity (see Chapters 3, 4, 5, 6, and 7);

---The definition of the term "storage period" has been changed (see 3.2) to adapt to my country's technical conditions and improve operability;

---Explanations of the criteria for determining significant differences have been added (see Chapter 5), improving the comparability of results;

---The specific brand and model restrictions have been removed (see section 6.2 of ISO /T R23016-3.2021), and "Use NanoSight (Malvern)" will be changed to "Use NanoSight (Malvern)". "Apparatus (see ISO 19430:2024)" to avoid trademark restrictions;

---Non-critical fixed instrument parameters have been removed (see section 6.2 of ISO /T R23016-3.2021), and the "laser wavelength" is no longer rigidly specified.

The equipment is configured with features such as 635nm process, 40mW power, monochrome CCD, and NTA 3.1.46 software version to ensure compatibility with different manufacturers. model. The following editorial changes have been made to this document.

---Note 3.2 has been added to clarify that the temperature setting in this document is 20°C, in order to enhance the generality of the description.

Introduction

The use of microbubble technology is experiencing rapid growth in the domestic market, spreading across various fields including industry, agriculture, and academia. Most notably, ultra-microbubble technology... The application of microbubble (UFB) technology in the agricultural field has attracted great attention as a key technology for improving agricultural productivity and efficiency.

Therefore, this technology helps promote the United Nations Sustainable Development Goals (SDGs), such as ensuring sufficient food and water resources on land.

As part of a standardization strategy for microbubbles in agriculture, GB /Z 43996.2-2024 has been published, describing the application of microbubbles in agriculture.

A test method for promoting barley seed germination using a fine bubble water generation system. Although the concentration of ultrafine bubbles is closely related to the promotion of barley seed germination... The study closed, but did not specifically explain the effect of bubble number concentration.

For the practical application of ultrafine bubble technology in seed germination, it is important to provide data specifying the ultrafine gas required to promote seed germination.

Minimum bubble quantity concentration. This data provides useful information for users to select a suitable ultrafine bubble generation system.

This document presents relevant experimental data describing the effects of different concentrations of ultrafine bubbles on barley seed germination. The relationship between promoting effects.

GB /Z 43996, "Agricultural Applications of Microbubble Technology," aims to outline universally applicable principles and guidelines for the agricultural application of microbubble technology.

The requirement is for standardization, and it is proposed to consist of five parts.

---Part 1: Test Methods for Evaluating the Growth-Promoting Effect of Ultrafine Bubble Water on Hydroponic Lettuce. The aim is to determine the growth-promoting effect of ultrafine bubble water on hydroponic lettuce. Growth testing methods.

---Part 2: Test methods for evaluating the germination-promoting effect of ultrafine bubble water on barley seeds. The aim is to determine the effect of ultrafine bubble water on barley seed germination promotion. Methods for testing germination.

---Part 3: Guidelines on the Minimum Concentration of Ultrafine Bubbles for Promoting Barley Seed Germination. The aim is to clarify the minimum concentrations of ultrafine bubbles needed to promote barley seed germination. Minimum concentration of ultrafine bubbles in buds.

---Part 4: Test methods for evaluating the concentration of ultrafine air bubbles (UFB) that promote barley seed germination. The purpose is to evaluate... A test method for estimating whether the concentration of UFB reaches the minimum level required to promote barley seed germination.

---Part 5: Data Collection on Promoting Germination of Typical Vegetable Seeds Using Ultrafine Bubbles. The aim is to define typical vegetable varieties... Data acquisition and testing methods for the germination-promoting experiment using ultrafine bubbles.

1 Scope

This document provides guidelines for promoting barley seed germination using the lowest possible concentration of ultrafine bubbles (UFB).

Based on the data on barley seed germination rate in GB /Z 43996.2-2024, the effectiveness of promoting germination was evaluated by changing the germination time.

The minimum required concentration range of ultrafine bubbles, the promoting effect of ultrafine bubble water on barley seed germination, and thus the determination of its effect on promoting barley seed germination. The minimum required concentration range of ultrafine bubbles.

This document applies to the determination of ultrafine particles that promote barley seed germination under the barley germination test conditions specified in GB /Z 43996.2-2024. Minimum number concentration of bubbles.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies; for undated references, the latest version (including all amendments) applies. In this document.

GB/T 41914.1 Microbubble Technology - General Rules for the Use and Measurement of Microbubbles - Part 1: Terminology (GB/T 41914.1-2022, ISO 20480-1:2017, IDT)

GB/T 41914.2 Microbubble Technology - General Rules for the Use and Measurement of Microbubbles - Part 2: Classification of Microbubble Properties (GB/T 41914.2-2022,ISO 20480-2:2018, MOD)

GB /Z 43996.2-2024 Agricultural applications of microbubble technology - Part 2: Evaluation of its germination-promoting effect on barley seeds Method (ISO 23016-2:2019, MOD)

3 Terms and Definitions

The terms and definitions defined in GB/T 41914.1, GB/T 41914.2 and GB /Z 43996.2-2024, as well as the following terms and definitions, apply to this document.

The terminology databases maintained by ISO and IEC for standardization work are as follows. […]

3.1 T50

Calculate the time required for the germination rate to reach the maximum germination rate of 50%.

Note: See reference [1].

3.2 Storage period

Storage time of barley seeds at a set temperature.

Note: The storage temperature set for this document is 20°C.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download GB/Z 43996.3-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
24 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 43996.3-2026

$420.00