GB/Z 40680-2021General requirements for residual current operated protective devices for D.C. system (English PDF)
直流系统用剩余电流动作保护电器的一般要求
This is a limited preview
Buy now to download the full PDF (30 pages)
Need quotation for your management?
Get a formal quotation for GB/Z 40680-2021 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 11, 2021
Implementation date
October 11, 2021
Scope
GB/Z 40680-2021 is the English-translated version of 直流系统用剩余电流动作保护电器的一般要求.
GB/Z 40680-2021 is the Chinese standard "General requirements for residual current operated protective devices for D.C. system". Its scope clause reads: This document acts on residual currents that are expected to be used in DC systems, with a rated voltage not exceeding 400V DC and a rated current not exceeding 125A.
The drafting and test procedures for the protection of electrical appliances (hereinafter referred to as DC-RCD) standards set out the minimum general requirements, recommendations and information.
Note 1.This document can also be used as a guide for DC-RCD with a voltage not exceeding 1500V. This document is mainly used as a reference for drafting DC-RCD product safety standards.
This document is suitable for detecting the residual current, comparing it with the reference value, and opening the contact or opening when the residual current exceeds the reference value.
Extremely electrical. This document also includes combined appliances, each of which performs one or two of the above functions separately, but works together to complete all three Features.
Note 2.RCM (Residual Current Monitor in accordance with IEC 62020) only monitors electrical installations but does not provide protection. It is not included in this document and is not regarded as DC- RCD similar products or equivalent products.
According to IEC 60364-4-41, after the exposed conductive parts of the device are connected to a suitable ground electrode, the DC-RCD is expected to be used to provide faults Protect.
The DC-RCD with the rated DC residual operating current not exceeding 80mA can also provide additional Protect. According to IEC 60364-4-42, a residual current device with a rated residual operating current not exceeding 300mA can also be used for continuous earth faults.
Provide protection against fire hazards caused by electric current. DC-RCD is suitable for isolation. In addition to the single-pole DC-RCD with two current loops is not suitable for IT systems, DC-RCD is suitable for All power systems.
General type DC-RCD is resistant to false tripping, including surge voltage (caused by transient overvoltage or lightning induction) to generate load current in the device And no flashover occurred.
Note 3.The installation and use rules of RCD are given in IEC 60364 (all parts). Note 4.A surge protector installed downstream of the DC-RCD and connected in a common mode may cause false tripping.
The requirements of this document apply to normal environmental conditions (see 7.1). For DC-RCD used under severe environmental conditions, it can be supplemented with Add requirements.
Note 5.For DC-RCDs with a degree of protection higher than IP20, a special structure may be required. This document does not include DC-RCDs that use batteries.
IEC TR60755 contains specific additional requirements for RCDs assembled or embedded in equipment. These specific additional requirements also apply to DC-RCD.
Found what you need?
Document preview — GB/Z 40680-2021
National Standard of the People's Republic of China
- ICS
- 29.120.50
- Classification
- K 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Category
- 5 Characteristics of residual current appliances
- 6 Logo and other product information
- 7 Working conditions for use and installation
- 8 Structural and operational requirements
- 9 Drafting of DC-RCD product standard test clauses
- Appendix A (informative) Recommended circuit diagram for short-circuit test
1 Scope
This document acts on residual currents that are expected to be used in DC systems, with a rated voltage not exceeding 400V DC and a rated current not exceeding 125A.
The drafting and test procedures for the protection of electrical appliances (hereinafter referred to as DC-RCD) standards set out the minimum general requirements, recommendations and information.
Note 1.This document can also be used as a guide for DC-RCD with a voltage not exceeding 1500V.
This document is mainly used as a reference for drafting DC-RCD product safety standards.
This document is suitable for detecting the residual current, comparing it with the reference value, and opening the contact or opening when the residual current exceeds the reference value.
Extremely electrical.
This document also includes combined appliances, each of which performs one or two of the above functions separately, but works together to complete all three
Features.
Note 2.RCM (Residual Current Monitor in accordance with IEC 62020) only monitors electrical installations but does not provide protection. It is not included in this document and is not regarded as DC-
RCD similar products or equivalent products.
According to IEC 60364-4-41, after the exposed conductive parts of the device are connected to a suitable ground electrode, the DC-RCD is expected to be used to provide faults
Protect.
The DC-RCD with the rated DC residual operating current not exceeding 80mA can also provide additional
Protect.
According to IEC 60364-4-42, a residual current device with a rated residual operating current not exceeding 300mA can also be used for continuous earth faults.
Provide protection against fire hazards caused by electric current.
DC-RCD is suitable for isolation. In addition to the single-pole DC-RCD with two current loops is not suitable for IT systems, DC-RCD is suitable for
All power systems.
General type DC-RCD is resistant to false tripping, including surge voltage (caused by transient overvoltage or lightning induction) to generate load current in the device
And no flashover occurred.
Note 3.The installation and use rules of RCD are given in IEC 60364 (all parts).
Note 4.A surge protector installed downstream of the DC-RCD and connected in a common mode may cause false tripping.
The requirements of this document apply to normal environmental conditions (see 7.1). For DC-RCD used under severe environmental conditions, it can be supplemented with
Add requirements.
Note 5.For DC-RCDs with a degree of protection higher than IP20, a special structure may be required.
This document does not include DC-RCDs that use batteries.
IEC TR60755 contains specific additional requirements for RCDs assembled or embedded in equipment. These specific additional requirements also apply to
DC-RCD.
2 Normative references
The content of the following documents constitutes an indispensable clause of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
GB/T 41589 | GB/T 40820 | GB/T 37751.32 | GB/T 14048.16 | GB/T 10963.3 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.
Similar standards
How to Download GB/Z 40680-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/Z 102.17-2026 — Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation
GB/Z 103-2026 — Health informatics - The architecture of internet healthcare service network
GB/Z 108-2026 — Health informatics - Internet healthcare service pattern
GB/Z 40680-2021
$510.00