Valid

GB/Z 37312.2-2025Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components (English PDF)

航空电子过程管理 航空航天、国防及其他高性能应用领域(ADHP)电子元器件 第2部分:无源元件通用要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (44 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 37312.2-2025 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 3, 2025

Implementation date

December 3, 2025

Scope

GB/Z 37312.2-2025 is the English-translated version of 航空电子过程管理 航空航天、国防及其他高性能应用领域(ADHP)电子元器件 第2部分:无源元件通用要求.

GB/Z 37312.2-2025 is the Chinese standard "Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components".

Its scope clause reads: This document specifies the minimum requirements for passive components in general-purpose commercial off-the-shelf (COTS) products used in aerospace, defense, and other high-performance applications.

Low requirements. This document applies to ADHP applications that operate normally within the rated parameters specified in the manufacturer's published datasheet and comply with...

Passive components as specified in IEC 62239-1.Also used as a reference in other high-performance and high-reliability industries. In addition to complying with the requirements of this document, ADHP original equipment manufacturers (OEMs) must also comply with the relevant electronic component management plan.

(ECMP) procedure documents, improve product design or conduct further testing to verify its compliance with ADHP application requirements (see...). IEC 62239-1).

Found what you need?

Document preview — GB/Z 37312.2-2025

National Standard of the People's Republic of China

ICS
49.060
Classification
V 25

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1.Scope
  • 2 Normative References
  • 3.Terms, Definitions, Symbols, and Abbreviations
  • 3.1 Terms and Definitions
  • 3.2 Symbols and Abbreviations
  • 4.Technical Requirements 5.
  • 4.1 General Requirements
  • 4.1.1 General Rules
  • 4.1.2 Equivalent Method
  • 4.2 Procedure
  • 4.2.1 General Requirements
  • 4.2.2 Product Discontinuation Notice
  • 4.2.3 ESD Protection During Manufacturing
  • 4.2.4 Traceability
  • 4.3 Freight Control
  • 4.3.1 General Requirements
  • 4.3.2 Individual Packaging Containers
  • 4.3.3 Group Packaging
  • 4.3.4 Date Code
  • 4.3.5 Humidity Sensitivity Level (MSL)
  • 4.3.6 Lead-free marking
  • 4.3.7 Tag
  • 4.3.8 Electrostatic Discharge (ESD)
  • 4.4 Product or Process Change Notification (PCN)
  • 4.4.1 General Requirements
  • 4.4.2 Notice
  • 4.4.3 Notification Details
  • 4.5 Electrical Performance
  • 4.5.1 General Requirements
  • 4.5.2 Electrical performance test
  • 4.6 Mechanical properties
  • 4.6.1 General Requirements
  • 4.6.2 Component Identification
  • 4.6.3 Lead-free components
  • 4.6.4 Humidity Sensitivity Level
  • 4.6.5 Lead end plating
  • 4.6.6 Lead Terminal Plating Change Notice
  • 4.7 Audit Capability
  • 4.7.1 General Requirements
  • 4.7.2 Internal Quality Audit
  • 4.7.3 Subcontracting Production
  • 4.8 Quality Assurance
  • 4.8.1 General Requirements
  • 4.8.2 Quality System
  • 4.8.3 Sampling Plan
  • 4.8.4 Failure Analysis
  • 4.8.5 Factory weight
  • 4.9 Identification of
  • 4.9.1 General Requirements
  • 4.9.2 Identification Method
  • 4.9.3 Test Sample
  • 4.9.4 Identification Category
  • 4.9.5 Maintenance of Identification Standards
  • 4.9.6 Test Results During Manufacturing Process
  • 4.9.7 Reference Standard
  • 4.9.8 Appraisal Report
  • 4.9.9 Save File
  • 4.9.10 Component Change Appraisal
  • 4.9.11 Similarity Evaluation
  • 4.10 Product monitoring on the production line
  • 4.10.1 General Requirements
  • 4.10.2 Monitoring Program
  • 4.10.3 Issue Notice
  • 4.10.4 Data Report
  • 4.11 Environmental Health and Safety (EHS)
  • 4.11.1 General Requirements
  • 4.11.2 Compliant with EHS
  • 4.11.3 Component Operation
  • 4.11.4 Component Materials
  • Appendix A (Informative) Test Code (TC) Information

1 Scope

This document specifies the minimum requirements for passive components in general-purpose commercial off-the-shelf (COTS) products used in aerospace, defense, and other high-performance applications.

Low requirements.

This document applies to ADHP applications that operate normally within the rated parameters specified in the manufacturer's published datasheet and comply with...

Passive components as specified in IEC 62239-1.Also used as a reference in other high-performance and high-reliability industries.

In addition to complying with the requirements of this document, ADHP original equipment manufacturers (OEMs) must also comply with the relevant electronic component management plan.

(ECMP) procedure documents, improve product design or conduct further testing to verify its compliance with ADHP application requirements (see...).

IEC 62239-1).

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

Note. GB/T 2691-2016 Marking codes for resistors and capacitors (IEC 60062.2004, IDT)

IEC 61340-5-3 Classification of Performance and Requirements for Packaging of Electrostatic Discharge Sensitive Equipment

IEC 61760-4 Surface Mount Technology - Part 4.Classification, Packaging, Labelling and Handling of Moisture-Sensitive Devices (Surfacemount Technology)

Note. GB/T 45638-2025 Product packaging labels for electronic components using barcodes and two-dimensional symbols (IEC 62090.2017, NEQ)

IEC 62239-1 Avionics Process Management - Management Plan - Part 1.Preparation and Maintenance of Electronic Component Management Plans

Note. GB /Z 31478-2015 Development of electronic component management plans for avionics process management (IEC /T S62239.2008, IDT) vices)

Items) […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 44 pages — is available in the English PDF.

Referenced standards

Normative references

IEC 61340-5-3 · IEC 61760-4 · IEC 62239-1

Similar standards

How to Download GB/Z 37312.2-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
44 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 37312.2-2025

$695.00