GB/Z 126.1-2025Process management for avionics - Electronics design - Part 1: Electrical signal properties, naming conventions and interface control document (ICD) (English PDF)

Foreword

This document is a report-type guidance technical.

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents". Drafting.

This document is Part 1 of GB /Z 126 "Electronic Design for Aerospace Electronics Process Management". GB /Z 126 has been published as follows..

---Part 1: Electrical Signal Characteristics, Naming Conventions, and Interface Control Documents (ICDs).

This document is equivalent to IEC TR63238-1:2019 "Aeronautical Electronics Process Management - Electronic Design - Part 1: Electrical Signal Characteristics, Naming conventions and interface control documents (ICDs). The document type has been changed from an IEC technical report to a national standardization guidance document in my country..

Introduction

GB /Z 126 specifies the management and technical requirements for avionics product projects, and is proposed to consist of the following parts.

---Part 1: Electrical Signal Characteristics, Naming Conventions, and Interface Control Documents (ICDs). The purpose is to provide telecommunications interfaces for electronic components.

The naming convention is used for planning and maintaining electronic component interfaces and integration specifications.

Interface Control Documents (ICDs) are documents that specify the interfaces between various subsystems and devices of avionics products, or between them and other systems, subsystems, and devices.

The design documents for the body interface relationships detail the product's electrical interfaces, providing clear guidance for designers of avionics products.

Previously, the ICD (Integrated Device Design) for avionics products in my country was mainly developed through negotiations between the main equipment manufacturers and the airborne equipment manufacturers, and it usually required multiple rounds of iteration. Final draft.

This document defines connector type, connector identifier, pin number, input/output, reference net, signal type, polarity, and source/negative polarity.

ICD descriptions, including carrier type and signal waveforms, standardize the development and design process of avionics products, and improve the design efficiency of avionics products. Design quality.

1 Scope

This document provides information and templates for Project Interface Control Files (ICDs) used to create files containing electronic components (such as circuit board assemblies or...).

Interface Control Document (ICD) for electronic equipment projects. This document provides naming conventions for electrical signals used in electronic component interfaces and lists seven types.

Example: This document is intended for original equipment manufacturers (OEMs) to plan and maintain electronic component interfaces and integration specifications, avoiding interference with electrical signals.

Misunderstandings can lead to unnecessary design and/or integration errors and testing complications.

2 Normative references

This document has no normative references.

3 Terms, Definitions and Abbreviations