GB/Z 30556.1-2017Electromagnetic compatibility -- Installation and mitigation guidelines -- General considerations (English PDF)

1 Scope

In order to ensure the electromagnetic compatibility (EMC) of electrical and electronic equipment or systems used in industrial, commercial and residential environments, "Electromagnetic

This section of the Guidance on Capacity Building and Mitigation gives general requirements and guidance on mitigation methods. Suitable for those sensitive electrical or electronic equipment

And systems and installations that may have a high emission level that may degrade the overall ambient electromagnetic (EM) environment, users, and a range of manufacturer. Mainly applicable to new facilities, but also to the expansion and improvement of existing facilities where economic conditions permit.

Suggestions for some specific issues are given elsewhere in the EMC Guide to Installation and Mitigation. For example. Grounding system

Including the design and implementation of grounded electrodes and grounded networks, the design and implementation of lapsing instruments or systems with earth or grounded networks, suitable cables

As well as the design and implementation of mitigation measures including shielding housings, high frequency filters, isolation transformers and surge protection devices.

The recommendations on EMC aspects of the facilities given in this section are neither safety nor the effective transmission of electricity in the facility

Lose side However, these two main aspects are also considered in the EMC recommendations. Increase installed sensitive devices or systems

EMC, these two aspects can be implemented simultaneously, and with the application of this section recommended practices and standards such as IEC 60364 [3] series

Those related safety requirements are not contradictory. Because each facility is unique, designers and installers are responsible for specific facilities

Choose the most relevant recommendations.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this article

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

IEC 60050 (161) .1990 International Electrotechnical Vocabulary chapter 161. Electromagnetic compatibility [International Electrotechnical Vo- cabulary (IEV) -Chapter161.Electromagneticcompatibility]

IEC 60050 (826) .1982 International Electrotechnical Vocabulary Chapter 826. Electrical installation of buildings [International Electrotechnical- nicalVocabulary (IEV) -Chapter826.Electricalinstalationsofbuildings]

IEC 61000-1-1.1992 Electromagnetic compatibility (EMC) Part 1. Overview Chapter 1. Basic terms and definitions of the application and interpretation

[Electromagneticcompatibility (EMC) -Part 1.General-Section1.Applicationandinterpretation offundamentaldefinitionsandterms]

IEC 61000-2-5.1995 Electromagnetic compatibility (EMC) Part 2. Environment Chapter 5. Classification of the electromagnetic environment Electromagnetic compatibility

Standard [Electromagneticcompatibility (EMC) -Part 2.Environment-Section5.Classificationof electromagneticenvironments-BasicEMCpublication]

IEC 61000-4 Electromagnetic compatibility (EMC) Part 4. Test and measurement techniques [Electromagneticcompatibility (EMC) -Part 4.Testingandmeasurementtechniques] (all parts)

IEC 61024-1.1990 lightning protection of buildings Part 1. General principles [Protectionofstructuresagainst lighting-Part 1.Generalprinciples]

3 Terms and definitions

Terms and definitions defined in IEC 60050 (161) and IEC 60050 (826) apply to this document.

A list of abbreviations is provided at the end of this chapter.

GB/T 37284 | GB/T 37283 | GB/Z 37150 | GB/Z 30556.9 | GB/Z 30556.8 | GB/T 30556.5 | […]