Valid

GB/Z 26138-2010Printing machinery - Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment (English PDF)

印刷机械 印刷机系统和印后系统以及相关辅助设备的图形符号

Preview PDF

This is a limited preview

Buy now to download the full PDF (22 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 26138-2010 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

January 14, 2011

Implementation date

January 14, 2011

Scope

GB/Z 26138-2010 is the English-translated version of 印刷机械 印刷机系统和印后系统以及相关辅助设备的图形符号.

GB/Z 26138-2010 collects the graphical symbols used on printing presses, on finishing and post-press machinery and on the auxiliary equipment that goes with them.

The symbols mark what a control does or show a function, a state or a mode of operation, and they are meant for the places where the operator acts on the machine: push-buttons, touch screens and keyboards.

Besides the symbol set itself, the document fixes how a symbol is designed and how it is placed and oriented on the machine, following the basic rules of IEC 80416-1 for the symbol originals and of ISO 80416-2 for the form and use of arrows.

Manufacturers of printing and finishing equipment use it so that the same function carries the same sign from one machine to another. It is identical to ISO/TR 15847:2008.

Found what you need?

Document preview — GB/Z 26138-2010

National Standard of the People's Republic of China

ICS
37.100.10; 85.100
Classification
J 87

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 graphic symbol design and placement requirements
  • 3.1 graphic symbol design
  • 3.2 graphic symbols placed in the direction of
  • 3.3 printing presses and finishing system new graphic symbol proposal
  • 4 graphic symbol category or group and convention
  • 4.1 Graphic symbol category or group
  • 4.2 graphic symbols convention
  • 5 Graphic symbols
  • 5.1 Basic graphic symbols, group 0 (see Table 2)
  • 5.2 Operation related graphic symbols, the first group (see Table 3)
  • 5.3 Screen-related graphical symbols, Group 2 (see Table 4)
  • 5.4 Graphic symbols related to printing and process (operation), Group 3 (see Table 5)
  • 5.5 Design (component/device) related graphic symbols, the first 4 groups (see Table 6)
  • 5.6 Graphical symbols related to work (user projects), Group 5 (see Table 7)
  • 5.7 Safety related graphic symbols, Group 6 (see Table 8)
  • Appendix A (informative) Example of using basic symbol combinations to create symbols
  • A.1 Overview
  • A.2 Example
  • A.2.1 Possible combination changes
  • A.2.2 Air and air flow direction
  • A.2.3 Move the arrow
  • A.2.4 printing system unit

Foreword

This instructional document has been drafted in accordance with the rules given in GB/T 1.1-2009.

This guidance document uses the translation method identical with ISO /T R15847.2008 "Graphic Technology Press System and Finishing Finishing System and related auxiliary equipment graphic symbols. " Our document, which corresponds in a consistent manner to the international documents that are normative references in this Guidance Document, is as follows.

GB/T 5465.11 Basic rules for graphical symbols for electrical equipment Part 1. The generation of prototype symbols (GB/T 5465.11- 2007, IEC 80416-1:2001, IDT)

GB/T 16902.2 devices with graphical symbols that rules - Part 2. Arrow formation and use (GB/T 16902.2- 2008, ISO 80416-2:2001, IDT)

The following editorial changes have been made to this technical document.

--- In line with the current printing machinery industry standards, the guidance of technical documents in the name of "graphics technology" be amended to "print mechanical";

--- In paragraph 2 of paragraph 3.3, the words "Secretariat of the TC130 Working Group of the International Organization for Standardization" be replaced by the words "Secretariat of the SAC/TC 192" (See 3.3);

--- Appendix B B.3 "International Organization for Standardization TC130 Secretariat" and "International Organization for Standardization TC130WG5 "And the like to" SAC/TC192 Secretariat "(see B.3 in Appendix B);

--- Added Pinyin index (see index).

1 Scope

This guidance document defines graphical symbols that apply to press systems, finishing systems, and associated ancillary equipment. These figures Symbols are used to distinguish purposes or display functions/states (conditions/methods) and are used in the operation of the device.

These graphical symbols are used primarily for device control, including buttons, touch screens, and keyboards.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version applies to this document. For undated references, the latest edition (including all amendments) applies to this document.

IEC 80416-1 Basic rules for graphical symbols for electrical equipment - Part 1. Prototype symbols (Basicprinciplesfor graphicalsymbolsforuseonequipment-Part 1: Creationofsymboloriginals)

ISO 80416-2 devices with graphical symbols that rules Part 2. Arrow formation and use (Basicprinciplesfor graphicalsymbolsforusesonequipment-Part 2: Formanduseofarrows)

3 Graphic symbol design and placement requirements

3.1 Graphic symbol design

The general requirements for graphical symbol design are given in the international standards IEC 80416-1 and ISO 80416-2.

Additional requirements for graphic symbols used in printing presses and finishing systems include the following. Pattern design should be legible. For this purpose , The size of the symbol should be at least 10 mm × 10 mm, and the linearity of the pattern and the pixel reproduction should be clear. However, in some cases , The size of the symbol may be larger than 10 mm × 10 mm for proper pixel reproduction. Text as the main part of the graphic (letters/numbers Word) height should be at least 4mm, and should be easy to read in the operating parts.

Graphic symbols should be designed to high-contrast two-dimensional pattern.

Note: Graphical symbols that represent a three-dimensional object with isometric drawing are considered two-dimensional as they have only wide and high features.

Graphical outlines (small squares, circles, triangles, etc.) should be filled (filled with black, dark black). The opposite applies to the blank (with white or Bright fill). Therefore, no matter what kind of situation should be applied to provide the corresponding background. The meaning of graphic symbols in this guideline is not Should be based on the color or shape as a basis or change.

Graphic symbols should reflect the functioning of the operation.

3.2 Graphic symbols placed in the direction

The graphical symbols of the control elements (keys, buttons, switches, etc.) shall be marked on or near the control element. When the graphical symbol is attached to the control block In the near future, the entire dial should be consistent and the relationship with the control area should be clear.

Unless otherwise specified, the direction of the graphic symbol should be marked according to this instructional document.

When the direction of a graphic symbol is mirrored, it means that the graphic symbol can be mirrored or upside down in the vertical direction.

3.3 Printing press and finishing system new graphic symbol proposal

In general, as technology changes, the demand for new graphical symbols is also growing. In order to control the different versions of the graphical symbols of devices

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.

Referenced standards

Normative references

IEC 80416-1 · ISO 80416-2 · IEC 80416 · ISO 80416

Similar standards

How to Download GB/Z 26138-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
22 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 26138-2010

$1,110.00