GB/Z 184.1-2026Cast irons - Part 1: Materials and properties for design (English PDF)
铸铁 第1部分:面向设计的材料与性能
This is a limited preview
Buy now to download the full PDF (48 pages)
Need quotation for your management?
Get a formal quotation for GB/Z 184.1-2026 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 30, 2026
Implementation date
July 30, 2026
Scope
GB/Z 184.1-2026 is the English-translated version of 铸铁 第1部分:面向设计的材料与性能.
GB/Z 184.1-2026 is the Chinese standard "Cast irons - Part 1: Materials and properties for design". Its scope clause reads: This document provides information about cast iron materials, aiming to enable users and designers to understand cast iron as a material in greater depth.
Solve the problem and accurately select its applicable scenarios. This document clarifies the achievable and achievable performance indicators of cast iron materials and the underlying reasons, and is not intended as a textbook for cast iron metallurgy.
The book aims to help people choose appropriate materials for the right reasons, while avoiding unrealistic additional requirements that are specified or expected.
Not only is it difficult to achieve, but it may also impair the intended application effect. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/Z 184.1-2026
National Standard of the People's Republic of China
- ICS
- 77.080.10
- Classification
- J 31
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction IV
- 1.Scope
- 2 Normative References
- 3.Terms and Definitions
- 4.Why is cast iron used as an engineering material?
- 5 Overview
- 6 ISO 185 Gray Cast Iron
- 8 ISO 17804 Ausferritic ductile iron (ADI)
- 9 ISO 5922 Malleable Cast Iron
- 10 ISO 16112 Dense Graphite Cast Iron
- 11 ISO 2892 Austenitic Cast Iron
- 12 ISO 21988 Wear-resistant cast iron
1 Scope
This document provides information about cast iron materials, aiming to enable users and designers to understand cast iron as a material in greater depth.
Solve the problem and accurately select its applicable scenarios.
This document clarifies the achievable and achievable performance indicators of cast iron materials and the underlying reasons, and is not intended as a textbook for cast iron metallurgy.
The book aims to help people choose appropriate materials for the right reasons, while avoiding unrealistic additional requirements that are specified or expected.
Not only is it difficult to achieve, but it may also impair the intended application effect.
2 Normative references
This document has no normative references.
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Alloying
The hardenability of materials can be improved by adding elements such as copper, nickel and molybdenum.
Annealing
Heat treatment (3.17) to generate ferrite (3.12) by decomposing iron-carbon compounds (3.21) and pearlite (3.26).
3.3 ausferrite
The microstructure of the cast iron matrix obtained by controlling the heat treatment process is mainly acicular ferrite (3.12) and high-carbon austenite (3.5).
3.4 Isothermal quenching heat treatment
Heat the ductile iron casting to a certain temperature [above the austenite (3.5) initiation temperature] and hold it at that temperature for a sufficient time to allow carbon to diffuse into the austenite.
In the body, it is then cooled at a certain rate to a certain temperature [above the martensite (3.23) transformation temperature] to avoid the formation of pearlite (3.26), and kept warm for a sufficient period of time.
Sufficient time is allowed for the transformation of the matrix structure to obtain the desired properties through heat treatment (3.17).
Note. The microstructure produced by this process mainly consists of acicular ferrite and high-carbon austenite; this structure is called austenite (3.3). ISO /T R945-3 provides...
An example of ferroic microstructure was presented.
[Source. ISO 17804.2020, 3.3]
3.5 austenite
The matrix microstructure formed immediately after cast iron solidification will transform into ferrite (3.12), pearlite (3.26), and austenite at lower temperatures.
Ferrite (3.3) and/or martensite (3.23), unless the austenite is stabilized at lower temperatures by adding nickel.
The austenitic cast iron is fully alloyed (3.1), or isothermal quenching heat treatment is performed on the austenitic cast iron containing sufficient silicon to prevent the formation of bainite (3.6).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 48 pages — is available in the English PDF.
Similar standards
How to Download GB/Z 184.1-2026
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/Z 184.2-2026 — Cast irons - Part 2: Welding
GB/Z 102.17-2026 — Semiconductor devices - Discrete devices - Part 17: Magnetic and capacitive coupler for basic and reinforced insulation
GB/Z 103-2026 — Health informatics - The architecture of internet healthcare service network
GB/Z 184.1-2026
$770.00