Valid

GB/Z 17624.2-2013Electromagnetic compatibility - General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena (English PDF)

电磁兼容 综述 与电磁现象相关设备的电气和电子系统实现功能安全的方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (101 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 17624.2-2013 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 17, 2013

Implementation date

December 17, 2013

Scope

GB/Z 17624.2-2013 is the English-translated version of 电磁兼容 综述 与电磁现象相关设备的电气和电子系统实现功能安全的方法.

GB/Z 17624.2-2013 is the Chinese guidance document, identical to IEC/TS 61000-1-2:2008, that sets out a methodology for achieving functional safety of electrical and electronic systems and installations with regard to electromagnetic phenomena, including what this implies for the equipment used in them.

It links EMC to the safety lifecycle of IEC 61508 and deals with the electromagnetic environment, EMC aspects of design and integration, verification and validation of immunity to electromagnetic disturbances, EMC tests for functional safety and documentation.

Informative annexes give examples of disturbance levels, measures and techniques against disturbances, performance criteria, the relation between system, equipment and product, electromagnetic phenomena and safety integrity levels, and EMC safety planning.

It is Part 2 of the GB/Z 17624 series on general EMC matters. It was issued on 17 December 2013.

Found what you need?

Document preview — GB/Z 17624.2-2013

National Standard of the People's Republic of China

ICS
33.100
Classification
L 06

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Foreword3
  • Introduction5
  • 1 Scope8
  • 2 Normative references9
  • 3 Terms, definitions and abbreviations10
  • 4 General considerations16
  • 5 The achievement of functional safety18
  • 6 The electromagnetic environment23
  • 7 EMC aspects of the design and integration process28
  • 8 Verification/validation of immunity against electromagnetic disturbances for functional safety32
  • 9 EMC tests for functional safety38
  • 10 Documentation46
  • Annex A (informative) Examples of electromagnetic disturbance levels47
  • Annex B (informative) Measures and techniques for the achievement of functional safety with regard to electromagnetic disturbances54
  • Annex C (informative) Information concerning performance criteria85
  • Annex D (informative) Considerations on the relationship between safety-related system, equipment and product, and their specifications90
  • Annex E (informative) Considerations on electromagnetic phenomena and safety integrity level94
  • Annex F (informative) EMC safety planning98
  • Bibliography101

Foreword

GB/Z 17624 "Electromagnetic compatibility - General" currently includes the following parts.

- Electromagnetic compatibility. General. Application and interpretation of fundamental definitions and terms (GB/T 17624.1-1998)

- Electromagnetic compatibility - General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena (GB/Z 17624.2-2013). This Technical Specification is Part 2 of GB/Z 17642.

This Technical Specification was drafted in accordance with the rules given in GB/T 1.1-2009.

This Technical Specification uses translation method to identically adopts the international standard IEC/TS 61000-1-2:2008 "Electromagnetic compatibility (EMC)

- Part 1-2.General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena".

The Chinese documents that have consistent correspondence with the international documents normatively cited in this Technical Specification are as follows.

- GB/T 4365-2003, Electrotechnical terminology -- Electromagnetic compatibility (IEC 60050 (161).1990, IDT);

- GB/T 16499-2008, The Preparation of safety publication and the use of basic safety publications and group safety publications (IEC 104 Guidance.1997, NEQ);

- GB/T 17626 (all parts), Electromagnetic compatibility -- Testing and measurement techniques [IEC 61000-4 (all parts)];

- GB/T 17626.1-2006, Electromagnetic compatibility -- Testing and measurement techniques -- Overview of immunity tests (IEC 61000-4-1:2000, IDT);

- GB/Z 18039.1-2000, Electromagnetic compatibility. Environment. Classification of electromagnetic environments (IEC 61000-2-5:1996, IDT);

- GB/T 20438 (all parts), Functional safety of electrical/electronic/programmable electronic safety-related systems [IEC 61508 (all parts)];

- GB/T 20438.1-2006, Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 1: General requirements (IEC 61508-1:1998, IDT);

- GB/T 20438.2-2006, Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (IEC 61508-2:2000, IDT);

- GB/T 20438.4-2006, Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 4: Definitions and abbreviations (IEC 61508-4:1998, IDT). This Technical Specification has only made the following editorial changes.

- Delete the Introduction of IEC/TS 61000-1-2:2008.Move the content of "Particular considerations for GB/Z 17624.2" after the Introduction of IEC/TS 61000-1-2:2008 to the Introduction in this Technical Specification.

1 Scope

This Technical Specification establishes a methodology for the achievement of functional safety only with regard to electromagnetic phenomena of electrical and electronic systems and installations, as installed and used under operational conditions.

This methodology includes the implication it has on equipment used in such systems and installations.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

IEC104 Guidance.1997, The preparation of safety publications and the use of basic safety publications and group safety publications

3 Terms, definitions and abbreviations

For the purposes of this document, the definitions contained in IEC 60050 (161) as well as the following apply.

4 General considerations

Electromagnetic disturbances can influence the performance of equipment and the functional safety of systems.

5 The achievement of functional safety

The overall lifecycle relevant for the functional safety of safety-related E/E/PE systems is defined in IEC 61508, and shown in Figure 1.

6 The electromagnetic environment

Relevant and significant information exists within the EMC body of publications regarding the electromagnetic environment present where most electrical or electronic equipment operates.

7 EMC aspects of the design and integration process

The electromagnetic environment in the place where the safety-related system is used shall not unacceptably affect its functional safety. This requires that the level of immunity of the safety-related system is sufficient for the intended safety integrity and electromagnetic environment, over its lifetime.

The objective of verification is to confirm and to demonstrate that the deliverables of each phase meet in all respects the requirements of that phase. Hence verification is performed within the individual phase and is related to the levels below the overall system level. for example, equipment level or component level.

8 Verification/validation of immunity against electromagnetic disturbances for functional safety

9 EMC tests for functional safety

Usually, the functional immunity tests in a product or generic standard do not consider all of the possible electromagnetic phenomena (as listed in Table A.1). It is also conceivable that a high-level electromagnetic disturbance that has not been taken into account could have a safety implication. […]

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 101 pages — is available in the English PDF.

Referenced standards

Normative references

IEC104

Similar standards

How to Download GB/Z 17624.2-2013

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
101 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 17624.2-2013

$770.00