Valid

GB/Z 152-2025Ergonomics guidelines for the optimization of musculoskeletal workload (English PDF)

优化肌肉骨骼工作负荷的人类工效学指南

Preview PDF

This is a limited preview

Buy now to download the full PDF (20 pages)

Need quotation for your management?

Get a formal quotation for GB/Z 152-2025 in 30 minutes.

Issued by

SAMR; SAC

Level / Type

National · Recommended

Issue date

December 3, 2025

Implementation date

December 3, 2025

Scope

GB/Z 152-2025 is the English-translated version of 优化肌肉骨骼工作负荷的人类工效学指南.

GB/Z 152-2025 is a Chinese national guidance document, identical to ISO/TS 20646:2014, with ergonomic guidelines for optimizing musculoskeletal workload at work and in non-occupational activities.

It sets basic principles and a framework of responsibilities for improvement activities, and describes a risk assessment process that leads to risk reduction measures.

Informative annexes provide a timeline for principles, planning and implementation, a hazard identification checklist, an action-oriented checklist, a questionnaire for monitoring the effectiveness of measures and an assessment form for risk reduction.

Terms such as harm, hazard, risk and risk assessment are taken from ISO 12100. It is aimed mainly at employers, workers and those working in ergonomics and occupational health, and does not guarantee full prevention of related disorders. It was issued on 3 December 2025.

Found what you need?

Document preview — GB/Z 152-2025

National Standard of the People's Republic of China

ICS
13.180
Classification
A 25

Issued by: State Administration for Market Regulation; Standardization Administration of the PRC

Contents

  • Preface
  • Introduction
  • 1 Scope
  • 2 Normative References
  • 3 Terms and Definitions
  • 4 General Guidelines
  • 4.1 Basic Principles for Improving Musculoskeletal Workload
  • 4.2 Basic Framework and Responsibilities of Musculoskeletal Workload Improvement Activities
  • 4.3 Implementing a musculoskeletal workload risk assessment process for risk-reducing activities
  • Appendix A (Informative) Principles, Plans, and Implementation Timeline
  • Appendix B (Informative) Hazard Identification Checklist Related to Musculoskeletal Workload
  • Appendix C (Informative) Action-Oriented Checklist
  • Appendix D (Informative) Questionnaire for Monitoring the Effectiveness of Musculoskeletal Workload Risk Reduction Measures
  • Appendix E (Informative) Risk Reduction Measures Assessment Form
  • References

Foreword

This document is a standard or guiding technical document.

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents". Drafting.

This document is equivalent to ISO /T S20646.2014 "Human Ergonomic Guidelines for Optimizing Musculoskeletal Workload". Document type. [omitted]

The ISO technical specifications have been adapted into my country's national standardization guidance documents. This document adds a chapter on "Normative References".

Introduction

Work-related musculoskeletal disorders (such as lower back pain and upper and lower limb diseases) are gradually becoming more common in industrialized and developing countries.

A major issue in ergonomics. The high incidence of work-related musculoskeletal disorders is a critical problem that urgently needs to be addressed, not only for... Improving workers' health and quality of life is also a way to increase productivity.

To address work-related musculoskeletal disorders, it is crucial to develop necessary preventative measures, including improving work conditions.

Provide adequate health guidance and training, establish secondary prevention and treatment measures, and conduct follow-up care for workers after long-term sick leave. Reassign.

Implementation is considered the most cost-effective solution and can improve the quality of work-life balance. Various activities have been promoted to improve MSWL (Master-Study-Life Balance).

Furthermore, new standards are being developed to improve working conditions related to factors that cause MSWL (Mental State Work Lack). However, to improve... MSWL requires a comprehensive work-related methodology that takes into account the above factors and finds solutions. Ergonomic Guidelines for Optimizing Musculoskeletal Workload

1 Scope

MSWL (Master of Science in Work) related factors and various ergonomic standards help to develop effective and efficient methods for workplace and non-occupational activities.

Reduce or optimize MSWL-related activities. These activities are based on risk assessment.

This document is primarily intended for employers, employees, and personnel involved in ergonomics and occupational health. Preventing MSWL does not always mean... To reduce workload, methods for reducing MSWL also include evaluating the work environment and organization as a system to identify which factors contribute to this reduction.

Changes can safely manage MSWL. While this document provides ideas for effective and efficient measures to reduce or optimize MSWL, it does not... Complete prevention of health problems caused by MSWL cannot be guaranteed.

2 Normative references

This document has no normative references.

3 Terms and Definitions

The following terms and definitions apply to this document.

3.1 Musculoskeletal workload

The musculoskeletal system load generated by work movements, maintaining work postures, and exerting force.

3.2 Harm

Physical injury or health damage. [Source: ISO 12100]

3.3 Hazard

Potential sources of harm. [Source: ISO 12100]

3.4 Risk

The combination of the likelihood of injury and the severity of injury. [Source: ISO 12100]

3.5 Risk assessment

This includes the entire process of risk analysis and risk assessment. [Source: ISO 12100]

3.6 Risk analysis

The combination of job description, risk identification, and risk estimation standards.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.

Similar standards

How to Download GB/Z 152-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
20 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/Z 152-2025

$360.00