GB/T 9917.2-2008Camera iens - Part 2: Fixed focus iens (English PDF)
照相镜头 第2部分:定焦距镜头
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 9917.2-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
October 7, 2008
Implementation date
April 1, 2009
Scope
GB/T 9917.2-2008 is the English-translated version of 照相镜头 第2部分:定焦距镜头.
GB/T 9917.2-2008 is the Chinese national specification for fixed focal length photographic lenses and is Part 2 of GB/T 9917. It sets their classification and designation, the requirements, the test methods, the inspection rules and the instructions for use, packaging, transport and storage.
It applies to fixed focal length camera lenses for a 24 mm x 36 mm frame, and lenses of other frame sizes may use it for reference.
Quality characteristics are graded in index levels by focal length band, and the standard defines the symbols used: the F number and the minimum nominal F number Fmin, the effective field radius y', and camera resolution in line pairs per millimetre at the centre of the field (<=0.25 y') and at its edge.
It replaces GB/T 9917-1988, was issued on 7 October 2008 and has applied since 1 April 2009.
Found what you need?
Document preview — GB/T 9917.2-2008
National Standard of the People's Republic of China
- ICS
- 37.040.10
- Classification
- N 43
- Replacing
- GB/T 9917-1988
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and symbols
Foreword
GB/T 9917 "taking lens" is divided into several parts.
--- Part 1. zoom lens;
--- Part 2. fixed focal length lens;
This section GB/T 29917 Part of, instead of GB/T 9917-1988 "camera lens" in the fixed-focus lens part.
Section compared with GB/T 9917-1988 The main changes are as follows.
--- Frame size of 60mm × 60mm fixed focal length lens to use as a reference (first paragraph of the 1988 edition, Tables 3 and 6; Excerpts Chapter 1, paragraph 2);
--- Change the focal length of the demarcation zone (Table 4 1988 edition, this edition of Tables 2 to 5);
--- Quality characteristics into a unified index level (see 4.3 and Chapter 5) five;
--- Quality characteristics and quality indicators according to the focal length of segment classification to be broken down (see Chapter 5);
--- Field division to harmonization;
--- Edge of the field increased the camera resolution of 0.85 y 'with the field of view requirements (1988 version 2.4.4, this version of Table 1);
--- Increased reliability of early functional failure (see 5.11 and 6.11);
--- Remove the modulation transfer coefficient (1988 Version 2.8 and 3.8);
--- Increasing the classification and specification code, inspection rules, instructions for use, packaging, transportation and storage (see Chapter 4, Chapter 7, Chapters 8 Chapter 9).
1 Scope
This section GB/T 9917 specifies the fixed focal length lens and naming classification, requirements, test methods, inspection rules, instructions for use, package Equipment, transportation and storage.
This section applies to the frame size of 24mm × 36mm fixed focal length of the photographic lens (hereinafter referred to as the lens). Non-frame size 24mm × 36mm fixed focal length lens can refer to use.
2 Normative references
The following documents contain provisions which, through reference to GB/T 9917 to the present, constitute provisions of this section. For dated references Documents, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Research into whether the parties to the agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.
GB/T 9917.1-2002 photographic lenses - Part 1. zoom
GB/T 13964 Photographic Machinery terminology
JB/T 7473-1994 photographic lens resolution test chart
Measurement JB/T 8248.2 photographic lens effective aperture and relative aperture
JB/T 8248.3 photographic lens vignetting and image uniformity coefficient surface illuminance measurements
JB/T 8248.4 photography lens flare coefficient measurement method
JB/T 8248.5 photographic lens focal length measurement
JB/T 8248.6 Determination of the photographic lens camera resolution
3 Terms, definitions and symbols
3.1 Terms and Definitions
GB/T terms and definitions 13964 and GB/T 9917.1-2002 established apply to this section.
3.2 Symbol
Some of the symbols used in this part are given in Table 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 9917.1-2002Camera lens — Part 1: Zoom lens
- GB/T 13964Photographic machinery - Vocabulary
- JB/T 7473-1994Camera Lens - Resolution Test Pattern
- JB/T 8248.2Measurement of Photographic Lens Characteristics - Part 2: Measurement of Effective Aperture and Relative Aperture
- JB/T 8248.3Camera lenses - Measurement method for vignetting coefficient and uniformity of image plane illuminance
- JB/T 8248.4Photographic lenses - Measurement method for veiling glare index
Cited by
Similar standards
Editions of GB/T 9917.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 9917.2-2008 | Camera iens - Part 2: Fixed focus iens | current edition | Current |
| GB/T 9917-1988 | Camera iens - Part 2: Fixed focus iens | previous edition | Superseded |
This page sells the current edition, GB/T 9917.2-2008. Earlier editions are listed for reference only.
How to Download GB/T 9917.2-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 13964-2008 — Photographic machinery - Vocabulary
JB/T 7473-1994 — Resolution test charts for camera lenses
JB/T 8248.2-1999 — Camera lenses - Measurement method for effective aperture and relative aperture
Secure payment via Stripe
Payments accepted
GB/T 9917.2-2008
$135.00