GB/T 8995-2008In-core instrumentation for neutron fluence rate measurements in nuclear reactors (English PDF)
核反应堆中子注量率测量堆芯仪表
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 8995-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
July 18, 2008
Implementation date
April 1, 2009
Scope
GB/T 8995-2008 is the English-translated version of 核反应堆中子注量率测量堆芯仪表.
GB/T 8995-2008 is the Chinese national standard covering in-core instrumentation for neutron fluence rate measurements in nuclear reactors. It was issued on 18 July 2008 and has been in force since 1 April 2009, replacing GB/T 8995-1988.
The document is under the responsibility of the Standardization Administration of China. This page is published from the official record of the 2008 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 8995-2008
National Standard of the People's Republic of China
- ICS
- 27.120
- Classification
- F 81
- Replacing
- GB/T 8995-1988
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 General Requirements
- 3.2 Construction Survey
- 3.3 Construction Planning
- 4.2 Construction Traffic
- 4.3 Structure, Materials and Equipment Transportation
- 4.4 Configuration of distributed resources
- 4.5 Grid structure and layout design
- 5 Neutron Fluence Rate Measurement
- 5.2 Neutron Detector
- 5.3 Neutron Fluence Rate Measuring Instrument
- 5.4 Neutron Fluence Rate Level-Related Alarms, Controls, and Shutdowns
- 5.5 Calibration and testing of neutron fluence rate measuring instruments
- 6 Temperature measurement
- 6.2 Fuel assembly temperature measurement
- 6.3 Moderator Temperature Measurement
- 6.4 Coolant temperature measurement
- 6.5 Temperature Measurements Important to Reactor Safety
- 6.6 Temperature protection instrument
- 6.7 Monitoring program
- 6.8 Environmental monitoring program
- 6.9 Emergency environmental monitoring
- 7 Coolant Measurement
- 7.2 Coolant flow measurement
- 7.3 Coolant pressure measurement
- 7.4 Coolant level measurement
- 7.5 Coolant Leakage Measurement
- 7.6 Coolant Purity Measurement
- 7.7 Coolant radioactivity measurement
- 8 Protection system
- 8.1 Introduction
- 8.2 Input-output diagram
- 8.3 Comprehensive Assessment of Energy-saving Design
- 9 Instrument power source
- 9.2 Reliable power system
- 9.3 Trial Run of Wind Turbine Generator System
- 9.4 Testing of Transformer
1 Foreword
GB/T 8995-2008 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 18 July 2008 and has been in force since 1 April 2009.
It replaces the earlier edition GB/T 8995-1988.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 8995-2008 falls under ICS 27.120, in the field of energy and heat transfer engineering.
This catalogue holds 1,532 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages
4 Related standards
Other editions:
GB/T 8995-2026 (later edition)
GB/T 8995-1988 (earlier edition)
Standards on related subjects:
NB/T 20015-2021 — Nuclear power plant simulators for use in operator training and examination
NB/T 20332-2015 — Construction requirements for prestressed concrete containments for pressurized water reactor nuclear power plants
NB/T 20325.1-2014 — Prestressing technology specification for safety containment of PWR nuclear power plants - Part 1: Material
GB/T 7164-2022 — Characteristics and test methods of radiation detectors for nuclear reactors
GB/T 5204-2021 — Periodic surveillance testing of the safety system of nuclear power plant
5 Classification and status
International classification (ICS): 27.120
Chinese Standard Classification (CCS): F 81
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 47843-2026Instrumentation important to safety for nuclear power plants - Characteristics and test methods of in-core self-powered neutron detectors
- GB/T 36041-2018Monitoring criteria for variable important to safety in nuclear power plants for pressurized water reactors
- NB/T 20285-2014General requirements of reactor system design for pressurized water reactor nuclear power plants
- NB/T 20215-2013Type Test for Micro Fission Chamber Used for In-core Neutron Flux Measuring of PWR Nuclear Power Plants
Similar standards
Editions of GB/T 8995
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 8995-2008 | In-core instrumentation for neutron fluence rate measurements in nuclear reactors | current edition | Current |
| GB/T 8995-1988 | In-core instrumentation for neutron fluence rate measurements in nuclear reactors | previous edition | Superseded |
This page sells the current edition, GB/T 8995-2008. Earlier editions are listed for reference only.
How to Download GB/T 8995-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 8995-2008
$150.00