GB/T 8844-2017Diecasting dies—Specifications (English PDF)
压铸模 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 8844-2017 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 29, 2017
Implementation date
April 1, 2018
Scope
GB/T 8844-2017 is the English-translated version of 压铸模 技术条件.
GB/T 8844-2017 is the Chinese national standard covering diecasting dies, Specifications. It was issued on 29 September 2017 and has been in force since 1 April 2018, replacing GB/T 8844-2003.
The document is under the responsibility of the Standardization Administration of China. This page is published from the official record of the 2017 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — GB/T 8844-2017
National Standard of the People's Republic of China
- ICS
- 25.120.30
- Classification
- J 46
- Replacing
- GB/T 8844-2003
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- [Preview only]
- 1 Scope
- 1.1 Overview
- 1.2 Specification
- 1.3 Consistency
- 2 Normative references
- 3 Terms and definitions
- 3.2 Abbreviations
- 3.3 Conventions
- 4 Information to be supplied to the electroplater
- 4.1 General
- 4.2 Related to the manufacturer
- 4.3 Related to the parent material
- 4.4 Common to all welding procedures
- 5 Service condition number
- 5.1 Cutting edge condition
- 6 Designation
- 7 Requirements
- 8 Range of Qualification
- 9 Test methods
1 Foreword
GB/T 8844-2017 was issued by State Administration for Market Regulation; Standardization Administration of the PRC on 29 September 2017 and has been in force since 1 April 2018.
It replaces the earlier edition GB/T 8844-2003, GB/T 8844-1988.
The GB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
GB/T 8844-2017 falls under ICS 25.120.30, in the field of manufacturing engineering.
This catalogue holds 2,509 other GB/T standards in that field.
In this catalogue, GB/T standards carry edition years from 1963 to 2026.
3 About this standard
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
English translation: about 15 pages
4 Related standards
Other editions:
GB/T 8844-2026 (later edition)
GB/T 8844-2003 (earlier edition)
GB/T 8844-1988 (earlier edition)
Standards on related subjects:
GB/T 45677-2025 — Forming moulds of composite material for upper cover of new energy vehicle battery pack
GB/T 6110-2021 — Drawing dies—Carbide alloy drawing dies—Structural types and dimensions
JB/T 3943-2017 — Drawing dies - Carbide drawing dies - Technical requirements
GB/T 4679-2026 — Die casting dies — Components — Technical specifications
GB/T 8845-2017 — Dies and moulds—Terminology
5 Classification and status
International classification (ICS): 25.120.30
Chinese Standard Classification (CCS): J 46
Prefix GB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 8844
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 8844-2017 | Diecasting dies—Specifications | current edition | Current |
| GB/T 8844-2003 | Diecasting dies—Specifications | previous edition | Superseded |
This page sells the current edition, GB/T 8844-2017. Earlier editions are listed for reference only.
How to Download GB/T 8844-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 8844-2017
$95.00