GB/T 8260-2008Types and dimensions of flexible joints of housing (English PDF)
卡箍式柔性管接头 型式与尺寸
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for GB/T 8260-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 31, 2008
Implementation date
December 1, 2009
Scope
GB/T 8260-2008 is the English-translated version of 卡箍式柔性管接头 型式与尺寸.
GB/T 8260-2008 is the Chinese standard "Types and dimensions of flexible joints of housing".
Its scope clause reads: This standard specifies the nominal pressure PN10 ~ PN100 Flexible clamp ring fittings, clamp flexible widening ring fittings, card Terms and definitions hoop type flexible grooved type pipe fittings and tube clamp flexible shoulder joint, type and size, and marking requirements.
This standard applies to nominal pressure PN10 ~ PN100 Flexible clamp ring fittings, clamp flexible widening ring fittings, card Design and manufacture of hoop type flexible grooved type pipe fittings and tube clamp flexible shoulder joints. Its clauses include terms and definitions; type and size.
Found what you need?
Document preview — GB/T 8260-2008
National Standard of the People's Republic of China
- ICS
- 23.040.60
- Classification
- J 15
- Replacing
- GB/T 8261-1987
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 type and size
1 Scope
This standard specifies the nominal pressure PN10 ~ PN100 Flexible clamp ring fittings, clamp flexible widening ring fittings, card
Terms and definitions hoop type flexible grooved type pipe fittings and tube clamp flexible shoulder joint, type and size, and marking requirements.
This standard applies to nominal pressure PN10 ~ PN100 Flexible clamp ring fittings, clamp flexible widening ring fittings, card
Design and manufacture of hoop type flexible grooved type pipe fittings and tube clamp flexible shoulder joints.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 8259-2008 clamp flexible tube fittings
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
By the clamp, seals and fasteners composition allows the conduit means connecting pipes have axial and radial deflection stretch.
3.2
When connecting two pipe clamp fittings, pipe axis deviates from an acute angle is formed.
3.3
When connecting two pipe clamp joints, axial displacement of the pipe.
3.4
Pipe ends and clamps fit.
4 type and size
4.1
clamp ring type flexible pipe joints shall comply with Figure 1, the basic dimensions shall comply with the provisions of Tables 1 to 4.
4.2
clamp type flexible widening ring fittings shall comply with Figure 2, the basic dimensions shall comply with the provisions in Tables 5 to 10.
4.3
clamp type flexible grooved type pipe joints shall comply with Figure 3, the basic dimensions shall conform to Table 11 and Table 12.
4.4
clamp type shoulder-type flexible pipe joints shall comply with Figure 4, the basic dimensions shall comply with the requirements of Tables 13 to 17.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of GB/T 8260
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 8260-2008 | Types and dimensions of flexible joints of housing | current edition | Current |
| GB/T 8261-1987 | Types and dimensions of flexible joints of housing | previous edition | Superseded |
This page sells the current edition, GB/T 8260-2008. Earlier editions are listed for reference only.
How to Download GB/T 8260-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 8260-2008
$345.00