GB/T 8223.1-2025Value engineering — Part 1: General terms (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

This document is Part 1 of GB/T 8223 Value Engineering. GB/T 8223 has been published in the following parts.

— Part 1: General terms.

This document replaces GB/T 8223.1-2009 "Value Engineering Part 1: Basic Terms" and is consistent with GB/T 8223.1-2009.

In addition to structural adjustments and editorial changes, the main technical changes are as follows.

— Changed the value (see 3.1, 2.3 of the 2009 edition), value engineering (see 3.2, 2.1 of the 2009 edition), value engineering objects (see 3.3, 2.2 of the 2009 edition), basic functions (see 4.2, 3.2 of the 2009 edition), auxiliary functions (see 4.3, 3.3 of the 2009 edition), Unnecessary functions (see 4.6, 3.7 of the 2009 edition), functional analysis (see 4.10, 3.10 of the 2009 edition), life cycle costs (see 5.2, 4.1 of the 2009 edition), Functional Cost (see 5.3, 4.2 of the 2009 edition), Value Engineering Working Group (see 6.4, 5.3) of the definition;

— Changed the term "functional target cost" to "target cost" and changed the definition accordingly (see 5.4, 4.2.2 of the 2009 edition);

— Deleted solution innovation (see 2.4 of the 2009 edition), alternative solutions (see 2.5 of the 2009 edition), usage functions (see 3.4 of the 2009 edition), taste function (see 3.5 of the 2009 edition), necessary function (see 3.6 of the 2009 edition), insufficient function (see 3.8 of the 2009 edition), redundant functions (see 3.9 of the 2009 edition), function definitions (see 3.10.1 of the 2009 edition), function arrangements (see 3.10.2 of the 2009 edition), functional measurement (see 3.10.3 of the 2009 edition), current cost of function (see 4.2.1 of the 2009 edition), price The terms and definitions of value engineering work procedures (see 5.1 of the 2009 edition) and value engineer (see 5.2 of the 2009 edition);

— Added undesirable functions (see 4.7), full-time functions (see 4.8), one-time functions (see 4.9), functional requirements analysis (see 4.11), Technical function analysis (see 4.12), functional structure (see 4.13), functional carrier (see 4.14), functional performance specification (see 4.15), function Energy demand expression (see 4.16), cost (see 5.1), value engineering work plan (see 6.1), value engineering objectives (see 6.2), value Engineering projects (see 6.3), value engineering project leader/host (see 6.5), design by objectives (see 6.6), design by cost (see 6.7) and their definitions.

Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.

This document is proposed and coordinated by the China National Institute of Standardization.

This document was drafted by: China National Institute of Standardization, China Aviation Technology Research Institute, Siemens (China) Co., Ltd., Beijing Aviation Industry Corporation University of Aeronautics and Astronautics.

The main drafters of this document are: Du Xiaoyan, Che Di, Pang Zhenghu, Cao Lili, Ding Shuwei, Liu Yunhe, Yi Tingting, Liu Jihong and Hu Guanzi.

The previous versions of this document and the documents it replaces are as follows.

— First published in 1987 as GB/T 8223-1987 "Basic Terms and General Working Procedures of Value Engineering";

— In the first revision in 2009, the content of the "Basic Terms" section of GB/T 8223-1987 was revised to GB/T 8223.1- 2009 "Value Engineering Part 1: Basic Terminology";

— This is the second revision.

Introduction

Value engineering is an organized and creative activity that uses functional and economic methods to maximize the value of Value engineering is usually used in the general management level of an organization and has an important impact on improving organizational efficiency and competitiveness.

In order to better promote the understanding of value engineering and technical exchange in organizations, China has formulated GB/T 8223 "Value Engineering", which is to be It consists of two parts.

— Part 1: General terms. The purpose is to define the general terms and definitions of value engineering.

— Part 2: General working procedures. The purpose is to establish working procedures for the implementation of value engineering and to define the activities at each stage of the working procedures. Provide guidance and advice.

Value engineering is based on the concept of value and a function-based approach. Therefore, it is necessary to define the general terminology and definition of value engineering.

GB/T 8223.1 has been issued and implemented for more than ten years. During this period, value engineering methods and technologies have made great progress.

The definitions of these terms have changed with the development of practice and cognition, and some new terms have been generated. In view of this, GB/T 8223.1 is revised.

In addition, to facilitate the understanding of the relationship between common value engineering terms, Appendix A of this document provides a conceptual relationship diagram.

1 Scope

This document defines the basic terminology of value engineering as well as terms and definitions related to function, cost, and organizational management.

This document applies to value engineering activities.

2 Normative references

This document has no normative references.

3 Basic terminology

4 Functional terms