GB/T 7672.23-2008Glass-fiber wound winding wires -- Part 23: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 (English PDF)

Foreword

GB/T 7672 "fiber covered winding wire" is divided into 15 parts.

--- Part 1. Glass pack flat copper winding wire - General requirements;

--- Part 2. 130 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire;

--- Part 3. 155 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire;

--- Part 4. 180 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire;

--- Part 5.200 impregnated, bare copper flat wire and glass fiber covered enamelled copper flat wire;

--- Part 6. Glass film wound flat copper wire;

--- Part 7. Glass - fiber mica wrapped flat copper wire (under consideration);

--- Part 8. glass film wound sintered copper flat wire (under consideration);

--- Part 9. polyester fibers and fiber wound copper flat wire and enamelled copper flat wire (under consideration);

--- Part 12. Self-adhesive glass package winding copper flat wire (under consideration);

--- Part 21. Glass round copper wire - General requirements;

--- Part 22. 155 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire;

--- Part 23. 180 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire;

--- Part 24.200 impregnated, bare copper wire and glass-fiber covered enamelled round copper wire;

--- Part 25. Glass - fiber covered film wrapped round copper wire (under consideration).

This part of GB/T 7672 the first part 23.

This section identical with IEC 60317-49:1999 "Standard winding wires - Part 49. Temperature 180 index glass envelope, the resin or paint adhesion, bare or enamelled round copper wire, "the first edition (in English).

For ease of use, this section made the following editorial changes.

--- Remove the IEC 60317-49:1999 Foreword and Introduction;

--- Chapter 2 applicable to the use of standard quotations removed IEC 60317-49:1999 quotations;

--- According to IEC 60317-0-6:2007 "Standard winding wires - Part 0-6. Glass pack, paint or resin bonded, bare or enamelled Round copper wire - General requirements "standard, the IEC 60317-49:1999 Chapter 1 of G2 to GL2, Grade1G1 and Grade1G2 to Grade1GL1 and Grade1GL2, Grade2G1 and Grade2G2 to Grade2GL1 and Grade2GL2.

This part is proposed by the China Electrical Equipment Industrial Association.

This part of the National Standardization Technical Committee of wire and cable.

This part mainly drafted by. Shanghai Electric Cable Research Institute.

Participated in the drafting of this section. Four Chuan Jinrui Electric Co., Ltd., Shanghai Yusheng Special Wire Co., Ltd., Wuxi City-Chau Electromagnetic Line Ltd., Shanghai Shen Mao Wire Factory.

1 Scope

GB/T 7672 provisions of this part of the temperature index 180, impregnated, bare copper wire and impregnated, bare, grade 1 or 2 film Enameled copper wire thickness requirements. Wherein varnish, for example, polyester or polyester-imide resin varnish.

Note. For this type of wire, thermal shock test is not applicable, the thermal shock temperature can not be determined. Therefore, the index can not be predetermined based on temperature and thermal shock temperature requirements Level.

One wire should be based on the following criteria. GB/T 6109.5-2008, GB/T 6109.20-2008 or GB/T 6109.22-2008, and should be negotiated by both parties.

Temperature index glass round copper wire depends on the type of varnish used. The varnish impregnated glass fiber should have a minimum 180 temperature index.

Glass cladding can be.

a) a single glass envelope;

b) In contrast double glass envelope, two fiber wound direction.

This section conductor nominal diameter range is as follows.

--- On the bare conductor wrapped double glass (GL2). from 0.500mm to and including 5.000mm;

--- On level 1 film thickness wire wrapped glass (Grade1GL1 and Grade1GL2). from 0.500mm to and including 1.600mm;

--- On level 2 film thickness wire wrapped glass (Grade2GL1 and Grade2GL2). from 0.500mm to and including 5.000mm.

Nominal conductor diameter see the provisions of GB/T 7672.21-2008 in Chapter 4.

2 Normative references

The following documents contain provisions which, through GB/T reference in this 7672 constitute provisions of this part. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB/T 6109.5-2008 enamelled round winding wire - Part 5. 180 polyester enamelled round copper wire (IEC 60317-8:1997, IDT) Part 20 GB/T 6109.20-2008 enamelled round winding line.200 polyamide imide or polyester imide varnish Round copper wire (IEC 60317-13:1997, IDT) GB/T 6109.22-2008 enamelled round winding wires - Part 22. 240 aromatic polyimide enamelled round copper wire (IEC 60317-46:1997, IDT) General provisions glass round copper wire. GB/T 7672.21-2008 fiber covered winding wires - Part 21 (IEC 60317-0-6:2007, IDT)

3 General definitions and test methods

General definitions and test methods see GB/T 7672.21-2008 in Chapter 3.

GB/T 7672.23-2008/IEC 60317-49:1999