Valid

GB/T 7672.1-2026Glass-fiber wound winding wires—Part 1: Glass-fiber wound rectangular copper wire—General requirements (English PDF)

玻璃丝包绕组线 第1部分:玻璃丝包铜扁绕组线 一般规定

Preview PDF

This is a limited preview

Buy now to download the full PDF

Need quotation for your management?

Get a formal quotation for GB/T 7672.1-2026 in 30 minutes.

Issued by

State Administration for Market Regulation; Standardization Administration of China

Level / Type

National · Recommended

Issue date

October 30, 2026

Implementation date

May 1, 2027

Scope

GB/T 7672.1-2026 is the English-translated version of 玻璃丝包绕组线 第1部分:玻璃丝包铜扁绕组线 一般规定.

GB/T 7672.1-2026 is the Chinese national standard "Glass-fiber wound winding wires—Part 1: Glass-fiber wound rectangular copper wire—General requirements". It was issued on October 30, 2026 by the State Administration for Market Regulation and the Standardization Administration of China, and takes effect on May 1, 2027. It is a current standard and replaces GB/T 7672.1-2008.

Found what you need?

Document preview — GB/T 7672.1-2026

National Standard of the People's Republic of China

Issued by: State Administration for Market Regulation; Standardization Administration of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Terms
  • 2.2 Symbols
  • 3 Terms and Definitions

1 Foreword

GB/T 7672.1-2026 was issued by State Administration for Market Regulation; Standardization Administration of China on 30 October 2026 and takes effect on 1 May 2027.

It replaces the earlier edition GB/T 7672.1-2008, GB/T 7672.1-1987.

It is one of 17 parts of the GB/T 7672 series.

2 Scope Preview

GB/T 7672.1-2026 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 76,457 other GB/T standards.

Of the 47,415 GB/T standards that do carry an ICS number, 3,437 (7%) fall under ICS 77, in the field of metallurgy.

3 About this standard

Issued by: State Administration for Market Regulation; Standardization Administration of China

4 Related standards

Other parts of this standard:

GB/T 7672.2-1987 — Glass-fiber covered winding wires--Part 2: Double glass fiber covered round wires

GB/T 7672.2-2008 — Glass-fiber wound winding wires - Part 2: Glass-fiber wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 130

GB/T 7672.3-1987 — Glass-fiber covered winding wires--Part 3: Single glass-fiber covered enamelled round wires

GB/T 7672.3-2008 — Glass-fiber wound winding wires -- Part 3: Glass-fiber wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155

GB/T 7672.3-2026 — 3: Glass-fiber wound resin or varnish impregnated ,bare or enamelled rectangular copper wire, temperature index 155

GB/T 7672.4-1987 — Glass-fiber covered winding wires--Part 4: Double glass-fiber covered rectangular wires

GB/T 7672.4-2008 — Glass-fiber wound winding wires -- Part 4: Glass-fiber wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180

GB/T 7672.4-2026 — 4: Glass-fiber wound resin or varnish impregnated ,bare or enamelled rectangular copper wire, temperature index 180

GB/T 7672.5-1987 — Glass-fiber covered winding wires--Part 5: Glass-fiber covered enamelled rectangular wires

GB/T 7672.5-2008 — Glass-fiber wound winding wires -- Part 5: Glass-fiber wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200

GB/T 7672.6-1987 — Glass-fiber covered winding wires--Part 6: Glass-fiber covered filmcovered rectangular wires

GB/T 7672.6-2008 — Glass-fiber wound winding wires - Part 6: Glass-fiber and film wound rectangular copper wire

GB/T 7672.21-2008 — Glass-fiber wound winding wires -- Part 21: Glass-fiber wound round copper wire -- General requirements

GB/T 7672.22-2008 — Glass-fiber wound winding wires -- Part 22: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155

GB/T 7672.23-2008 — Glass-fiber wound winding wires -- Part 23: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180

GB/T 7672.24-2008 — Glass-fiber wound winding wires -- Part 24: Glass-fiber wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200

Other editions:

GB/T 7672.1-2008 (earlier edition)

GB/T 7672.1-1987 (earlier edition)

5 Classification and status

Prefix GB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.

Referenced standards

Editions of GB/T 7672.1

EditionTitleRevisionStatus
GB/T 7672.1-2026Glass-fiber wound winding wires—Part 1: Glass-fiber wound rectangular copper wire—General requirements—Valid from 2027-05-01
GB/T 7672.1-2008Glass-fiber wound winding wires - Part 1: Glass-fiber wound rectangular copper wire - General requirements—Valid until 2027-05-01
GB/T 7672.1-1987Glass-fiber covered winding wires--Part 1: General—Obsolete

This page sells the current edition, GB/T 7672.1-2026. Earlier editions are listed for reference only.

How to Download GB/T 7672.1-2026

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GB/T 7672.1-2026

$255.00